BAT-2W Wireless Back-up Alert has been designed with the highest technology and equipped with the most advanced wireless features. The system helps the driver to be in better control when reversing. When the car approaches too close to an object in the detection zone, an alarm sounds, increasing the intensity in proportional to distance from the object, simultaneously displaying the direction of right or left side and distance. This allows the driver to have better control when parking in tight spaces and greatly improving safety and judgments.
Specifications:
•Compact and unique display unit
•Built-in buzzers both display and main body
•4 stage audio and visual LCD display from 1.6m to 0.4m (5.2ft to 1.3ft)
•2 high quality ultrasonic sensors installed on or under the rear bumper
•Display's distance, direction and sound
•Aids reversing in all weathers
•Easy installation on any vehicle
•Flexible installation design with wireless LCD display
•Best quality Sensor imported from Murada in Japan
Additional Info:
Back Up Alert Technology (BAT) combines both Audible and Visual warnings to help you back your vehicle with confidence. When vehicle is put in reverse, any objects that enter the rear detection zone (1-6 feet) will result in an audible warning beep from the B.A.T. system. The frequency and pitch of the beep increases as the object(s) get closer to the rear of the vehicle. The digital display simultaneously shows the actual distance to the nearest object in feet or meters. Another LED indicator identifies whether the object(s) is nearest to the left or right sensor(s).
Back-up Alert Technology ( B.A.T.) uses ultrasonic sensors to provide non contact presence, proximity, and distance measuring. The sensors are capable of detecting objects made of practically any material. They work in dry, dusty environments and are not adversely affected by falling rain, sleet or snow. The weatherproof sensors mount on or near the rear bumper of the vehicle and are connected by a shielded cable to the B.A.T. systems main control module. When the vehicle is put into reverse gear, each sensor starts to transmit a short burst of ultrasonic sound toward a specific target area. Any object(s) that enter into the target area reflect the sound back to the sensor. The B.A.T. system then measures the time for the echo to return to the sensor and computes the distance of the vehicle from the object(s). This information is then transmitted wirelessly via Radio Frequency to the LED Digital Display mounted in the drivers cabin area.
#Bat-2W
Click
for
Closer Look
Item Number Bat-2W and Other Related Items
When purchasing the Reverse Backing Sensor Alarm with Wireless LCD and Audible Reverse Backup Alarm, consider the other items listed below. You can add all desired items from below at one time by clicking the Suggested Items Add Page link.
