2010-2011 Infiniti G37 Vehicle Wiring Chart and Diagram

PART	COLOR	LOCATION
12 VOLT CONSTANT	WHITE (+) (SEDAN) See NOTE #7	BLACK 3-PIN PLUG, PIN 1 @ BCM, See NOTE #2
STARTER	BROWN (-) (Push-Button Start)	@ PUSH-BUTTON Ignition Switch or BLACK 40-PIN PLUG, PIN 18 @ BCM, See NOTE #2
STARTER 2	RED (+) (SEDAN) See NOTE #8	@ GRAY 40-PIN PLUG, PIN 21 @ BCM, See NOTE #2
IGNITION 1	LT.BLUE (+) (SEDAN) See NOTE #9	@ BLACK 40-PIN PLUG, PIN 11 @ BCM, See NOTE #2
IGNITION 2	YELLOW (-)	@ GRAY 40-PIN PLUG, PIN 16 @ BCM, See NOTE #2
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	TAN (+)	@ BLACK 40-PIN PLUG, PIN 31 @ BCM, See NOTE #2
ACCESSORY/HEATER BLOWER 2	TAN (+)	@ BLACK 40-PIN PLUG, PIN 24 @ BCM, See NOTE #2
KEYSENSE	LT. BLUE (+) See NOTE #10	@ GREEN 40-PIN PLUG, PIN 10 @ BCM, See NOTE #2
PARKING LIGHTS ( - )	N/A
PARKING LIGHTS ( + )	RED (+)	in DRIVERS KICK, HARNESS to the REAR of Vehicle
POWER LOCK	PURPLE (TYPE B) (SEDAN) See NOTE #11	WHITE 16-PIN PLUG, PIN 4 or 6 @ POWER WINDOW MAIN SWITCH
POWER UNLOCK	YELLOW (TYPE B) (SEDAN) (Double Pulse) See NOTE #12	WHITE 16-PIN PLUG, PIN 6 or 7 @ POWER WINDOW MAIN SWITCH
DOOR TRIGGER	GRAY (-) (SEDAN) See NOTE #6	@ GREEN 40-PIN PLUG, PIN 39 @ BCM, See NOTE #2
DOMELIGHT SUPERVISION	PURPLE (-)	@ WHITE 16-PIN PLUG, PIN 16 @ BCM, See NOTE #2
TRUNK RELEASE	GRAY (-)	@ GRAY 40-PIN PLUG, PIN 36 @ BCM, See NOTE #2
SLIDING POWER DOOR	N/A
HORN	LT. GREEN (-)	GRAY 8-PIN PLUG, PIN 8 @ HORN SWITCH
TACH	RED (SEDAN and COUPE) BROWN (CONVERTIBLE) (AC)	WHITE 12-PIN PLUG, PIN 10 @ POWER STEERING CONTROL MODULE, See NOTE #14
WAIT TO START LIGHT	N/A
BRAKE	BROWN (+)	@ GREEN 40-PIN PLUG, PIN 7 @ BCM, See NOTE #2
FACTORY ALARM DISARM	IS LOCK WIRE!!
ANTI-THEFT	INFINITI'S TRANSPONDER SYSTEM, Requires Bypass Module, See NOTE #1

EXTRA INFORMATION

NOTE #1: This vehicle is equipped with INFINITI'S TRANSPONDER ANTI-THEFT System that requires a Bypass Module for Remote Starting: Part# 791 Bypass Module (Key Required) requires an Extra Ignition Key placed inside module for Operation FOR REMOTE STARTING ONLY!!. Part # XK09 Bypass Module (No Key Require in Module) FOR REMOTE STARTING ONLY!! Part # DB-ALL Interface Bypass Module (No Key Required) this bypass is for Remote Starting and does the door locks (keyless entry), truck release, parking lights and Brake connection. To order go to the INTERFACE BYPASS MODULE Page on this website. NOTE #2: the BCM (Body Control Module) is located in the PASSENGER KICK PANEL. NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the FACTORY ALARM. The LOCK wire is a PURPLE (-), TYPE B, (Sedan and Convertible), GRAY (-) TYPE B, (Coupe) NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the FACTORY ALARM. The UNLOCK wire is a YELLOW (-), TYPE B, (Sedan), WHITE (-) (Coupe and Convertible) Requires Double Pulse. NOTE #5: the PSCU, (Power Steering Control Unit) is located under the PASSENGER DASH, behind the GLOVE BOX. NOTE #6: the DOOR TIGGER wire is GRAY (-), (Convertible) and RED (-) (Coupe) NOTE #7: the 12Volt constant wire is a WHITE (+) on the CONVERTIBLE and a BLUE (+) on the COUPE. NOTE #8; The STARTER #2 wire is a BROWN (-) on the CONVERTIBLE and a LT.BLUE (-) on the COUPE NOTE #9: The IGNITION #1 wire is a RED (+) on the CONVERTIBLE and a PURPLE (+) on the COUPE NOTE #10: The KEYSENSE wire is a LT.BLUE (+) on the CONVERTIBLE and a GREEN (+) on the COUPE NOTE #11: The ARM/LOCK wire is a PURPLE (TYPE B) on the CONVERTIBLE and a GRAY (TYPE B) on the COUPE, TEST this wire while Turning the Key in the Drivers Door. NOTE #12: The DISARM/UNLOCK wire is a WHITE (TYPE B) (DUOBLE Pulse) on the CONVERTABLE and the COUPE, TEST this wire while Turning the Key in the Drivers Door. NOTE #13: The DOOR TRIGGER wire is a RED (-) on the CONVERTIBLE and the COUPE NOTE #14: The POWER STEERING CONTROL MODULE is located under the passanger side dash, behind the GLOVEBOX.