Infiniti  G37 2010-2011
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   WHITE (+) (SEDAN) See NOTE #7   BLACK 3-PIN PLUG, PIN 1 @ BCM, See NOTE #2
 STARTER  BROWN (-) (Push-Button Start)  @ PUSH-BUTTON Ignition Switch or BLACK 40-PIN PLUG, PIN 18 @ BCM, See NOTE #2
 STARTER 2  RED (+) (SEDAN) See NOTE #8  @ GRAY 40-PIN PLUG, PIN 21 @ BCM, See NOTE #2
 IGNITION 1  LT.BLUE (+) (SEDAN) See NOTE #9  @ BLACK 40-PIN PLUG, PIN 11 @ BCM, See NOTE #2
 IGNITION 2  YELLOW (-)  @ GRAY 40-PIN PLUG, PIN 16 @ BCM, See NOTE #2
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  TAN (+)  @ BLACK 40-PIN PLUG, PIN 31 @ BCM, See NOTE #2
 ACCESSORY/HEATER BLOWER 2  TAN (+)  @ BLACK 40-PIN PLUG, PIN 24 @ BCM, See NOTE #2
 KEYSENSE  LT. BLUE (+) See NOTE #10  @ GREEN 40-PIN PLUG, PIN 10 @ BCM, See NOTE #2
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  RED (+)  in DRIVERS KICK, HARNESS to the REAR of Vehicle
 POWER LOCK  PURPLE (TYPE B) (SEDAN) See NOTE #11  WHITE 16-PIN PLUG, PIN 4 or 6 @ POWER WINDOW MAIN SWITCH
 POWER UNLOCK  YELLOW (TYPE B) (SEDAN) (Double Pulse) See NOTE #12  WHITE 16-PIN PLUG, PIN 6 or 7 @ POWER WINDOW MAIN SWITCH
 DOOR TRIGGER  GRAY (-) (SEDAN) See NOTE #6  @ GREEN 40-PIN PLUG, PIN 39 @ BCM, See NOTE #2
 DOMELIGHT SUPERVISION  PURPLE (-)  @ WHITE 16-PIN PLUG, PIN 16 @ BCM, See NOTE #2
 TRUNK RELEASE  GRAY (-)  @ GRAY 40-PIN PLUG, PIN 36 @ BCM, See NOTE #2
 SLIDING POWER DOOR  N/A  
 HORN  LT. GREEN (-)  GRAY 8-PIN PLUG, PIN 8 @ HORN SWITCH
 TACH  RED (SEDAN and COUPE) BROWN (CONVERTIBLE) (AC)  WHITE 12-PIN PLUG, PIN 10 @ POWER STEERING CONTROL MODULE, See NOTE #14
 WAIT TO START LIGHT  N/A  
 BRAKE  BROWN (+)  @ GREEN 40-PIN PLUG, PIN 7 @ BCM, See NOTE #2
 FACTORY ALARM DISARM   IS LOCK WIRE!!  
 ANTI-THEFT  INFINITI'S TRANSPONDER SYSTEM, Requires Bypass Module, See NOTE #1  
 EXTRA INFORMATION
 NOTE #1: This vehicle is equipped with INFINITI'S TRANSPONDER ANTI-THEFT System that requires a Bypass Module for Remote Starting: Part# 791 Bypass Module (Key Required) requires an Extra Ignition Key placed inside module for Operation FOR REMOTE STARTING ONLY!!. Part # XK09 Bypass Module (No Key Require in Module) FOR REMOTE STARTING ONLY!! Part # DB-ALL Interface Bypass Module (No Key Required) this bypass is for Remote Starting and does the door locks (keyless entry), truck release, parking lights and Brake connection. To order go to the INTERFACE BYPASS MODULE Page on this website. NOTE #2: the BCM (Body Control Module) is located in the PASSENGER KICK PANEL. NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the FACTORY ALARM. The LOCK wire is a PURPLE (-), TYPE B, (Sedan and Convertible), GRAY (-) TYPE B, (Coupe) NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the FACTORY ALARM. The UNLOCK wire is a YELLOW (-), TYPE B, (Sedan), WHITE (-) (Coupe and Convertible) Requires Double Pulse. NOTE #5: the PSCU, (Power Steering Control Unit) is located under the PASSENGER DASH, behind the GLOVE BOX. NOTE #6: the DOOR TIGGER wire is GRAY (-), (Convertible) and RED (-) (Coupe) NOTE #7: the 12Volt constant wire is a WHITE (+) on the CONVERTIBLE and a BLUE (+) on the COUPE. NOTE #8; The STARTER #2 wire is a BROWN (-) on the CONVERTIBLE and a LT.BLUE (-) on the COUPE NOTE #9: The IGNITION #1 wire is a RED (+) on the CONVERTIBLE and a PURPLE (+) on the COUPE NOTE #10: The KEYSENSE wire is a LT.BLUE (+) on the CONVERTIBLE and a GREEN (+) on the COUPE NOTE #11: The ARM/LOCK wire is a PURPLE (TYPE B) on the CONVERTIBLE and a GRAY (TYPE B) on the COUPE, TEST this wire while Turning the Key in the Drivers Door. NOTE #12: The DISARM/UNLOCK wire is a WHITE (TYPE B) (DUOBLE Pulse) on the CONVERTABLE and the COUPE, TEST this wire while Turning the Key in the Drivers Door. NOTE #13: The DOOR TRIGGER wire is a RED (-) on the CONVERTIBLE and the COUPE NOTE #14: The POWER STEERING CONTROL MODULE is located under the passanger side dash, behind the GLOVEBOX.