Vehicle
Wiring Details for your
2009-2012 Toyota Avalon Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2012 Toyota Avalon . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
BLACK (+) |
@ DASH FUSE BOX, (WHITE, 1-Pin Plug(A) Pin 1 |
STARTER |
BLUE (+) NOTE #2 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 8 |
STARTER
2 |
RED (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 1 |
IGNITION
1 |
YELLOW (+) NOTE #3 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6 |
IGNITION
2 |
GREEN (+) NOTE #4 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 4 |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
GRAY (+) NOTE #5 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 3 |
ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
BLUE (-) |
@ HEADLIGHT SWITCH, (WHITE, 20-Pin Plug) Pin 18 |
PARKING
LIGHTS ( + ) |
N/A |
|
POWER LOCK |
GREEN to PURPLE (TYPE B), NOTE #7 |
in DRIVERS KICK PANEL, (WHITE, 20-Pin Plug) Pin 16 |
POWER UNLOCK |
BLUE to BROWN (TYPE B), NOTE #8 |
in DRIVERS KICK PANEL, (WHITE, 20-Pin Plug) Pin 17 |
DOOR TRIGGER |
BLUE to PINK (-) |
in DRIVERS KICK PANEL, (BLUE, 20-Pin Plug) Pin 3 |
DOMELIGHT
SUPERVISION |
BROWN (- |
@ DASH FUSE BOX, (WHITE, 12-Pin Plug(R) Pin 5 |
TRUNK RELEASE |
BLUE (-) |
@ RELEASE SWITCH (WHITE, 6-Pin Plug) Pin 5 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
GRAY (-) |
@ HORN SWITCH (WHITE, 12-Pin Plug) Pin 8 |
TACH |
BLACK to WHITE (AC) |
LEFT of Steering Column (WHITE, 18-Pin Plug) Pin 17 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
WHITE to BLUE (+) |
@ BRAKE SWITCH or DASH FUSE BOX, (WHITE, 12-Pin Plug(P) Pin 3 |
FACTORY
ALARM DISARM |
GRAY to PURPLE (-) NOTE #9 |
in DRIVERS KICK PANEL, (WHITE, 20-Pin Plug) Pin 19 |
ANTI-THEFT |
TOYOTA'S TRANPONDER SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation,
2009-2011.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module, for Model years 2009-2010 Only!!
(For Remote Starting/Keyless Entry) Part #DB-ALL, (NO Extra Key Required for
Operation) 1-Key Required for Programming, for model year 2011 only!
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: on vehicles with SMART KEY, PUSH-BUTTON Start, the START Switch 1 wire is
BLUE (-) and the START Switch 2 wire is PURPLE (-) at the ENGINE Switch
(BLACK, 14-Pin Plug) Pins 7 and 2.
NOTE #3: on vehicles with SMART KEY, PUSH-BUTTON Start, the Ignition wire is BEIGE to
YELLOW (+) located to the LEFT of the Steering Column, (WHITE, 18-Pin Plug) Pin 11
NOTE #4: on vehicles with SMART KEY, PUSH-BUTTON Start, the Ignition 2 wire is a LT. GREEN
(+) located at the DASH FUSE BOX, (REAR, WHITE, 10-Pin Plug(I) Pin 9
NOTE #5: on vehicles with SMART KEY, PUSH-BUTTON Start, the ACCESSORY wire is a RED (+)
located at the DASH FUSE BOX, (REAR, WHITE, 10-Pin Plug(I) Pin 3
NOTE #6: the BODY ECU is located under the DRIVERS DASH, it is attached to the RIGHT side of
the DASH FUSE BOX.
NOTE #7: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Arm wire.
NOTE #8: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Disarm wire.
NOTE #9: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock the
doors.
|
|
|
|
|