Vehicle
Wiring Details for your
2009-2012 Ford Flex Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2009-2012 Ford Flex . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+) |
@ SJB, BLACK 1-PIN PLUG, PIN 1, SEE NOTE #2 |
| STARTER |
BLUE/WHITE (+) |
@ IGNITION SWITCH, BLACK 7-PIN PLUG, PIN 7 |
| STARTER
2 |
N/A |
|
| IGNITION
1 |
WHITE/ORANGE (+) |
@ IGNITION SWITCH, BLACK 7-PIN PLUG, PIN 1 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
VIOLET/GREEN (+) |
@ IGNITION SWITCH, BLACK 7-PIN PLUG, PIN 6 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
VIOLET/WHITE (+) |
IN DRIVERS KICK PANEL or SJB, GRAY, 13-PIN PLUG(B), PIN 6, SEE NOTE #2 |
| POWER LOCK |
BLUE/GREEN (TYPE B) |
IN DRIVERS KICK PANEL or SJB, GRAY, 26-PIN PLUG(C), PIN 17, SEE NOTE #2 |
| POWER UNLOCK |
YELLOW/VIOLET (TYPE B) |
IN DRIVERS KICK PANEL or SJB, GRAY, 26-PIN PLUG(C), PIN 4, SEE NOTE #2 |
| DOOR TRIGGER |
GREEN/VIOLET (-) |
IN DRIVERS KICK PANEL or SJB, GRAY, 26-PIN PLUG(C), PIN 14, SEE NOTE #2 |
| DOMELIGHT
SUPERVISION |
GRAY/VIOLET (+) |
IN PASSENGER KICK PANEL or SJB, GRAY, 14-PIN PLUG(A), PIN 9, SEE NOTE #2 |
| TRUNK RELEASE |
BROWN (-) |
IN DRIVERS KICK PANEL or BCM, GRAY, 26-PIN PLUG(C), PIN 7, SEE NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BLUE/WHITE (-) |
@ HORN SWITCH or BCM, BLACK 52-PIN PLUG(B), PIN 41, SEE NOTE #2 |
| TACH |
Any wire NOT BLUE or BLACK (AC) |
@ ANY FUEL-INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
VIOLET/WHITE (+) |
@ SWITCH ABOVE BRAKE PEDAL |
| FACTORY
ALARM DISARM |
GREEN/VIOLET (-) |
IN DRIVERS KICK PANEL |
| ANTI-THEFT |
FORDS TRANSPONDER ANTI-THEFT, SEE NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will need a
Bypass module 791,(use this module IF you have a extra ignition key to place inside
the 791 to remote start, if you do not have an extra key to use or wish not to have a
key placed inside this bypass module, we OFFER a KEYLESS INTERFACE BYPASS
MODULE that does not require a key to be placed inside the bypass module, this is
Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS
MODULE PAGE on this website. If the key has an "SA" stamped into the metal shaft the
vehicle will require Part # PKTX interface module. PKALL or PKFM are not required for "SA" key.
NOTE #2: The SJB,(Smart Junction Box) is located under the drivers side of the dash.
|
|
|
|
|
|
