Vehicle
Wiring Details for your
2008-2010 Toyota Highlander Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008-2010 Toyota Highlander . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
WHITE/BLACK (+) |
@ DASH FUSE BOX, (WHITE, 1-Pin Plug(A) Pin 1 |
| STARTER |
YELLOW (+), NOTE #2 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 7 |
| STARTER
2 |
RED (+) |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 3 |
| IGNITION
1 |
BLACK (+), NOTE #3 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6 |
| IGNITION
2 |
LIGHT BLUE (+), NOTE #4 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 1 |
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
GRAY (+), NOTE #5 |
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 2 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
LIGHT BLUE (-) |
@ HEADLIGHT SWITCH, (WHITE, 20-Pin Plug) Pin 18 |
| PARKING
LIGHTS ( + ) |
N/A |
|
| POWER LOCK |
ORANGE or TAN (TYPE B), NOTE #6 |
in DRIVERS KICK PANEL, (BLACK, 18-Pin Plug) Pin 8 |
| POWER UNLOCK |
GREEN (TYPE B), NOTE #7 |
in DRIVERS KICK PANEL, (BLACK, 18-Pin Plug) Pin 9 |
| DOOR TRIGGER |
BLUE (-) |
in DRIVERS KICK PANEL, (BLACK, 18-Pin Plug) Pin 15 |
| DOMELIGHT
SUPERVISION |
LT. BLUE (-) |
@ DASH FUSE BOX, (WHITE, 12-Pin Plug(R) Pin 5 |
| TRUNK RELEASE |
YELLOW to BROWN (-) (Liftgate), ORANGE or BEIGE to BROWN (-) (Glass) NOTE #8 |
in DRIVERS KICK PANEL, (GRAY, 12-Pin Plug) Pin 1, (BLACK, 18-Pin Plug) Pin 13 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
YELLOW to GRAY (-) |
@ HORN SWITCH or DASH FUSE BOX, (WHITE, 16-Pin Plug(D) Pin 11 |
| TACH |
LT. BLUE (AC) |
@ DATA LINK Connector, (WHITE, 16-Pin Plug) Pin 9 |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
BLUE (+) |
@ BRAK SWITCH or DASH FUSE BOX, (WHITE, 12-Pin Plug(P) Pin 3 |
| FACTORY
ALARM DISARM |
PURPLE (-) (Requires Double Pulse), NOTE #9 |
in DRIVERS KICK PANEL, (BLACK, 18-Pin Plug) Pin 12 |
| ANTI-THEFT |
TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1 |
@ IGNITION SWITCH TUMBLER |
| EXTRA
INFORMATION |
| NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: on vehicles with SMART KEY, PUSH-BUTTON Start, the START Switch 1 wire is
PINK (-) and the START Switch 2 wire is BROWN (-) at the ENGINE Switch
(BLACK, 14-Pin Plug) Pins 7 and 2.
NOTE #3: on vehicles with SMART KEY, PUSH-BUTTON Start, the Ignition wire is a WHITE (+)
@ the DASH FUSE BOX, (REAR, WHITE, 10-Pin Plug(I) Pin 7
NOTE #4: on vehicles with SMART KEY, PUSH-BUTTON Start, the Ignition 2 wire is a LT. BLUE
(+) located at the DASH FUSE BOX, (REAR, WHITE, 10-Pin Plug(I) Pin 9
NOTE #5: on vehicles with SMART KEY, PUSH-BUTTON Start, the ACCESSORY wire is a GRAY (+)
located at the DASH FUSE BOX, (REAR, WHITE, 10-Pin Plug(I) Pin 3
NOTE #6: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Arm wire.
NOTE #7: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Disarm wire.
NOTE #8: TEST this wire while opening the Liftge or Glass from the Handle on the Rear of the
Vehicle. On vehicles with Power Liftgate, the Open/Close wire is a RED (-) @ the
switch on the Dash, (BLUE, 5-Pin Plug) Pin 4.
NOTE #9 TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock
the Doors.
|
|
|
|
|
|
