| Note #1: CHRYSLERS TRANSPONDER SYSTEM, Requires Bypass Module: For REMOTE START
Only, Part # 791 and an extra ignition key for operation,
Note #2: the BCM (Body Control Module) is part of the FUSE/RELAY BOX located in the
Drivers Kick Panel.
Note #3: the DRIVERS DOOR Motor wires are DK. BLUE/RED - DK. BLUE/BLACK (Reverse Polarity)
@ DDM (BLACK, 20-PIN PLUG) PINS 12 and 11.
the PASSENGER DOOR Motor wires are DK. BLUE/RED - DK. BLUE/BLACK
(Reverse Polarity) @ BCM (52-PIN PLUG(C9) PINS 49 and 48.
the SIDE and REAR Door Motor wires are DK. BLUE/BROWN - DK. BLUE/BLACK (Reverse
Polarity) @ the BCM, (12-PIN PLUG(C7) Pins 12 and 11.
Note #4: the DDM (Driver Door Module)is located in the Drivers Door.
Note #5: on DIESEL Models, the TACH wire is a YELLOW/GRAY @ the ECM (BLACK, 94-PIN PLUG)
PIN 33. The ECM (Engine Control Module) is located on the Fender behind the Battery.
|
