Service: 954-728-9571
Items: 0 - Total: $0.00
See Cart | Check Out
About Us
What's New
Products
Contact Us
Current Specials!
Ordering Information
Our Terms
Shipping Information
Commando and Your Privacy

Search Again?

 

Need Installation?
Locate An Installer Near You That's Commando Authorized.
Are You An Installer?
Get Listed In our Commando Installer Database and Receive Installation Leads For Free!

Diagrams
Tech Support Home
Ignition & Starter
Starter Kill (3 Wire Harness)
(Download)
-------------------
Starter Kill (5 Wire Harness)
(Download)
-------------------
2nd Starter Wire Relay
(Download)
-------------------
Isolating Starter and Ignition Wires
(Download)
-------------------
Door Locks
Negative Pulse Door Locks
(Download)
-------------------
Positive Pulse Door Locks

(Download)
-------------------

Reverse Polarity Door Locks
(Download)
-------------------
Vacuum Type Door Locks
(Download)
-------------------
Mercedes Vacuum Door Locks
(Download)
-------------------
Toyota Child Safety Locks
(Download)
-------------------
Dodge Caravan Power Locks (Single Wire)

(Download)
-------------------
Ford Probe Door Locks
(Download)
-------------------
Door Lock Actuators
(Download)
-------------------
Trunk & Dome
Trunk Release Configurations
(Download)
-------------------
Domelight Supervision
(Download)
-------------------
Item Links!
Car Alarms
Car Alarm Combos
Alarm Acessories
Remote Car Starters
Keyless Entry
Motorcycle Alarms
Power Windows
Switch Kits
Tailgate Locks
Power Locks
Backup Alarms
Shaved Door Handles
FREE Vehicle Wiring
Diagrams & Charts
Select Your Make


Vehicle Wiring Details for your
2008- Chrysler Pacifica Wiring Diagram
Printer Friendly
Version
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008- Chrysler Pacifica . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.


 PART   COLOR  LOCATION
 12 VOLT CONSTANT   PURPLE/RED (+)   @ BCM, (Plug(C1) Pin 1 , Note #2
 STARTER  YELLOW (+)  @ IGNITION SWITCH, (BLACK 5-Pin Plug) Pin 4
 STARTER 2  PURPLE/BROWN (-) thru a 180 Ohm Resistor, See NOTE #1  @ IGNITION SWITCH, (BLACK 5-Pin Plug) Pin 2
 IGNITION 1  PINK/GRAY (+)  @ IGNITION SWITCH, (BLACK 5-Pin Plug) Pin 3
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  Use STARTER 2, (-) thru a 560 Ohm Resistor, See NOTE #1  
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  BROWN/WHITE (-) THRU A 920 Ohm Resistor  @ HEADLIGHT Switch or BCM, (Plug(C5) Pin 31, Note #2
 PARKING LIGHTS ( + )  N/A  
 POWER LOCK  PURPLE/LT. BLUE (-) thru a 1.8K Ohm Resistor, Note #3  @ DDM, (BLACK, 20-Pin Plug) Pin 13, Note #4
 POWER UNLOCK  Use LOCK wire, (-) thru a 750 Ohm Resistor, Double Pulse, See Note #3  
 DOOR TRIGGER  PURPLE (-)  @ DDM, (BLACK, 20-Pin Plug) Pin 11, Note #4
 DOMELIGHT SUPERVISION  YELLOW/WHITE (+) (Front) and YELLOW/ORANGE (+) (Dome Light)  @ DRIVERS A Pillar or BCM, Plug(C2) Pins 6 and 7, Note #2
 TRUNK RELEASE  TAN/DK. GREEN (-) thrua 4.7K Ohm Resistor, Note #5  @ BCM, (Plug(C2) Pin 30, Note #2
 SLIDING POWER DOOR  N/A  
 HORN  DK. GREEN/PURPLE (-)  @ HORN Switch
 TACH  Any wire NOT BROWN/GRAY (3.8L) or PINK/BROWN (4.0L) (AC)  @ Any FUEL INJECTOR
 WAIT TO START LIGHT  N/A  
 BRAKE  WHITE/DK. GREEN (+)  @ BRAKE Switch
 FACTORY ALARM DISARM   See Note #3  
 ANTI-THEFT  CHRYSLER'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 Note #1: CHRYSLERS TRANSPONDER SYSTEM, Requires Bypass Module, Part # DB-ALL or XK09 with NO RESISTORS OR RELAYS REQUIRED for REMOTE STARTING and KEYLESS ENTRY, to order go to the INTERFACE BYPASS MODULE Page on this website. Note #2: the BCM, (Body control Module) is located under the Drivers side of the Dash, on the Firewall. Note #3: the LOCK/UNLOCK wire is the Factory Alarm ARM/DISARM wire. On Base Models this wire is not present. You will need to add this wire to the pin location. The wire next to this open pin (13 on Base Models) is a ORANGE/TAN, Pin 12 and LT. BLUE/WHITE, Pin 13. Note #4: the DDM (Drivers Door Module) is part of the Power Window Switch in the Door. Note #5: TEST this wire while opening the Liftgate from the Handle on the Rear of the Vehicle. Vehicles with Power Liftgate, use a PURPLE/TAN(-) thru a 4.7K Ohm Resistor @ BCM, Plug(C2) Pin 29.
 
Shop By Category!
Security Systems
Keyless Entry
Remote Starters
Power Door Locks
Power Windows
Shaved Door Handles
SPAL Cooling Fans
Solenoids & Actuators
Alarm Sensors
Installation Accessories
Keyword Search
 
Go Search!
Precision Search
Brand Search

 

 

View Details... G20-PAC Car Alarm, Keyless Entry w/relay pack
$59.99

View Details... Commando DL-100 Car Alarm, Keyless Entry Upgrade
$59.00

View Details... 2000RS Remote Starter with Keyless Entry
$69.98

View Details... Astra 777 2 Way Car Alarm w/ LCD Pager and Keyless Entry w/ Relay Pack
$99.95

View Details... 2 Door Power Lock Kit with G20 Keyless Entry and Alarm
$89.99

View Details... G20 Car Alarm w/Keyless Entry
$49.99

View Details... Commando 550-S Car Alarms with Full Keyless Entry
$59.99

View Details... CrimeStoppers - RS1 1-way Remote Starter and full keyless Entry System
$74.99

View Details... Baretta 2 Way LCD Pager/ Car Alarm Keyless Entry
$99.99

View Details... Car Alarms w/ LCD 2 Way Pager and Keyless Entry
$89.95