Service: 954-728-9571
Items: 0 - Total: $0.00
See Cart | Check Out
About Us
What's New
Products
Contact Us
Current Specials!
Ordering Information
Our Terms
Shipping Information
Commando and Your Privacy

Search Again?

 

Need Installation?
Locate An Installer Near You That's Commando Authorized.
Are You An Installer?
Get Listed In our Commando Installer Database and Receive Installation Leads For Free!

Diagrams
Tech Support Home
Ignition & Starter
Starter Kill (3 Wire Harness)
(Download)
-------------------
Starter Kill (5 Wire Harness)
(Download)
-------------------
2nd Starter Wire Relay
(Download)
-------------------
Isolating Starter and Ignition Wires
(Download)
-------------------
Door Locks
Negative Pulse Door Locks
(Download)
-------------------
Positive Pulse Door Locks

(Download)
-------------------

Reverse Polarity Door Locks
(Download)
-------------------
Vacuum Type Door Locks
(Download)
-------------------
Mercedes Vacuum Door Locks
(Download)
-------------------
Toyota Child Safety Locks
(Download)
-------------------
Dodge Caravan Power Locks (Single Wire)

(Download)
-------------------
Ford Probe Door Locks
(Download)
-------------------
Door Lock Actuators
(Download)
-------------------
Trunk & Dome
Trunk Release Configurations
(Download)
-------------------
Domelight Supervision
(Download)
-------------------
Item Links!
Car Alarms
Car Alarm Combos
Alarm Acessories
Remote Car Starters
Keyless Entry
Motorcycle Alarms
Power Windows
Switch Kits
Tailgate Locks
Power Locks
Backup Alarms
Shaved Door Handles
FREE Vehicle Wiring
Diagrams & Charts
Select Your Make


Vehicle Wiring Details for your
2008- Chrysler Crossfire Wiring Diagram
Printer Friendly
Version
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2008- Chrysler Crossfire . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.


 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED (+)   @ IGNITION SWITCH, (7-Pin Plug) Pin 5
 STARTER  PURPLE (+)  @ IGNITION SWITCH, (7-Pin Plug) Pin 4
 STARTER 2  N/A  
 IGNITION 1  PINK/RED (+)  @ IGNITION SWITCH, (7-Pin Plug) Pin 1
 IGNITION 2  PINK/YELLOW (+)  @ IGNITION SWITCH, (7-Pin Plug) Pin 3
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  PINK/DK. GREEN (+)  @ IGNITION SWITCH, (7-Pin Plug) Pin 6
 ACCESSORY/HEATER BLOWER 2  DK. GREEN/WHITE (+)  @ IGNITION SWITCH, (7-Pin Plug) Pin 2
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  GRAY/BLACK(+)(Left) and GRAY/RED(+)(Right) Use both.  @ ICM, (BLACK, 21-Pin Plug) Pins 19 and 7, Note #2
 POWER LOCK  WHITE/DK. GREEN (-) thru a 180 Ohm Resistor, Note #4  @ CENTRAL LOCKING Switch on Dash, Pin 8
 POWER UNLOCK  Use LOCK wire (-)  
 DOOR TRIGGER  BROWN/GRAY (-)  @ SSM, (18-Pin Plug(C1) Pin 14, Note #3
 DOMELIGHT SUPERVISION  BLUE/BROWN (-)  @ DOME LIGHT
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  BLACK/PINK (-)  @ HORNS or RELAY CONTROL MODULE, Note #5
 TACH  Any wire NOT BLACK/DK. GREEN or BLACK/YELLOW (AC)  @ Any IGNITION COIL
 WAIT TO START LIGHT  N/A  
 BRAKE  BLACK/RED (+)  @ ICM, (WHITE, 21-Pin Plug) Pin 2, Note #2
 FACTORY ALARM DISARM   BLACK (-)  in DRIVERS KICK PANEL or SKREM (18-Pin Plug) Pin 8, Note #6
 ANTI-THEFT  CHRYSLER'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1  
 EXTRA INFORMATION
 Note #1: CHRYSLER'S ANTI-THEFT TRANSPONDER System, Requires INTERFACE BYPASS MODULE, PART #CHALL and CHTH2 Module for Remote Starting and Door Locks with no resistors or extra parts needed. To order go to the INTERFACE BYPASS MODULE Page on this website. Note #2: the ICM (Illumination control Module) is part of the Headlight Switch. Note #3: the SSM (Security System Module) is part of the Central Locking Pump on the Right Rear Floor fo the Luggage Compartment. Note #4: the POWER LOCK/UNLOCK wire will only work when the vehicle is running, the Factory Alarm Arm/Disarm wires only work when the vehicle is not running. You will need to use both sets for the Locks to work with Remote Start and Ignition Locks. Note #5: the RELAY CONTROL MODULE is located in the Control Module Box, next to the Battery, in the Engine Compartment. Note #6: the SKREM (Sentry Key Remote Entry Module) is located behind the Instrument Cluster.
 
Shop By Category!
Security Systems
Keyless Entry
Remote Starters
Power Door Locks
Power Windows
Shaved Door Handles
SPAL Cooling Fans
Solenoids & Actuators
Alarm Sensors
Installation Accessories
Keyword Search
 
Go Search!
Precision Search
Brand Search

 

 

View Details... G20-PAC Car Alarm, Keyless Entry w/relay pack
$59.99

View Details... Astra 777 2 Way Car Alarm w/ LCD Pager and Keyless Entry w/ Relay Pack
$99.95

View Details... CrimeStoppers - RS1 1-way Remote Starter and full keyless Entry System
$74.99

View Details... 2000RS Remote Starter with Keyless Entry
$69.98

View Details... G20 Car Alarm w/Keyless Entry
$49.99

View Details... Car Alarms w/ LCD 2 Way Pager and Keyless Entry
$89.95

View Details... 4 Door Power Lock Kit with G20 Keyless Entry and Alarm
$94.99

View Details... Baretta 2 Way LCD Pager/ Car Alarm Keyless Entry
$99.99

View Details... Commando DL-100 Car Alarm, Keyless Entry Upgrade
$59.00

View Details... CrimeStopper RS4 Remote Start and Full Keyless Entry System
$123.99