Vehicle
Wiring Details for your
2007-2012 Nissan Altima Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007-2012 Nissan Altima . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
WHITE/BLACK (+) (40AMP) |
@ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2 |
STARTER |
BROWN (-) |
@ PUSH-BUTTON SWITCH or BCM, (BLACK, 40-PIN PLUG), PIN 29, NOTE #2 |
STARTER
2 |
RED (-) |
@ BCM, (GRAY, 40-PIN PLUG), PIN 21, NOTE #2 |
IGNITION
1 |
RED/BLACK (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2 |
IGNITION
2 |
BROWN/WHITE (-) |
@ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2 |
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
YELLOW (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2 |
ACCESSORY/HEATER
BLOWER 2 |
BLUE (+) |
@ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2 |
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
RED/BLUE (+) |
@ DASH FUSE BOX, (WHITE, 10-PIN PLUG), PIN 8 |
POWER LOCK |
GRAY (TYPE B), NOTE #3 |
in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 17, NOTE #2 |
POWER UNLOCK |
GRAY/RED (TYPE B), NOTE #4 |
in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 20, NOTE #2 |
DOOR TRIGGER |
LT. BLUE (-) |
in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2 |
DOMELIGHT
SUPERVISION |
WHITE to YELLOW (-) |
@ DRIVERS A PILLAR or BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2 |
TRUNK RELEASE |
BLUE/RED (-) |
@ RELEASE Switch or BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2 |
SLIDING
POWER DOOR |
N/A |
|
HORN |
BLUE/ORANGE (-) |
@ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8 |
TACH |
PURPLE/WHITE (AC) |
@ ECM, (BLACK, 32-PIN PLUG), PIN 14, NOTE #5 |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
LT. GREEN to ORANGE/BLUE (+) |
@ BRAKE Switch or BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2 |
FACTORY
ALARM DISARM |
BLUE/RED or RED (-) Requires Double Pulse, NOTE #6 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7 |
ANTI-THEFT |
NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
|
EXTRA
INFORMATION |
NOTE #1: This vehicle is Equipped with NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM,
for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an
Extra Ignition key. (Requires extra key for Operation)
Part # XK09 for REMOTE STARTING ONLY, requires 1 key for
programming, NO key required for Operation.
Part # DB-ALL for REMOTE START/KEYLESS Entry, requires 1 key for programming
and NO Key for Operation.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: the BCM, (Body Control Module) is located Behind the INSTRUMENT CLUSTER.
NOTE #3: this wire is Only on vehicles with LEFT Front Only Anti-Pinch Power Window Systems.
On vehicles with LEFT and RIGHT Front ANTI-PINCH Power Window Systems, use the
FACTORY ALARM ARM wire, it is a BLUE/BLACK or BLUE (-) located at the POWER
WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4 or 6. TEST this wire while turning
the KEY in the DRIVERS DOOR.
NOTE #4: this wire is Only on vehicles with LEFT Front Only Anti-Pinch Power Window Systems.
On vehicles with LEFT and RIGHT Front ANTI-PINCH Power Window Systems, use the
FACTORY ALARM DISARM wire, it is a BLUE/RED or RED (-) Requires a Double Pulse,
located at the POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7. TEST
this wire while turning the KEY in the DRIVERS DOOR.
NOTE #5: the ECM, (Engine Control Module) is located in the ENGINE COMPARTMENT, next to
the BATTERY.
NOTE #6: On vehicles with LEFT Front ANTI-PINCH Power Window Systems Only, this wire is
located in the DRIVERS KICK PANEL or at the BCM, (GREEN, 40-PIN PLUG)
PIN 15, TEST this wire while turning the KEY in the DRIVERS DOOR.
|
|
|
|
|