| PART | COLOR | LOCATION |
| 12 VOLT CONSTANT | WHITE/BLACK (+) (40AMP) | @ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2 |
| STARTER | BROWN (-) | @ PUSH-BUTTON SWITCH or BCM, (BLACK, 40-PIN PLUG), PIN 29, NOTE #2 |
| STARTER 2 | RED (-) | @ BCM, (GRAY, 40-PIN PLUG), PIN 21, NOTE #2 |
| IGNITION 1 | RED/BLACK (+) | @ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2 |
| IGNITION 2 | BROWN/WHITE (-) | @ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2 |
| IGNITION 3 | N/A | |
| ACCESSORY/HEATER BLOWER 1 | YELLOW (+) | @ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2 |
| ACCESSORY/HEATER BLOWER 2 | BLUE (+) | @ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2 |
| KEYSENSE | N/A | |
| PARKING LIGHTS ( - ) | N/A | |
| PARKING LIGHTS ( + ) | RED/BLUE (+) | @ DASH FUSE BOX, (WHITE, 10-PIN PLUG), PIN 8 |
| POWER LOCK | GRAY (TYPE B), NOTE #3 | in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 17, NOTE #2 |
| POWER UNLOCK | GRAY/RED (TYPE B), NOTE #4 | in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 20, NOTE #2 |
| DOOR TRIGGER | LT. BLUE (-) | in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2 |
| DOMELIGHT SUPERVISION | WHITE to YELLOW (-) | @ DRIVERS A PILLAR or BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2 |
| TRUNK RELEASE | BLUE/RED (-) | @ RELEASE Switch or BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2 |
| SLIDING POWER DOOR | N/A | |
| HORN | BLUE/ORANGE (-) | @ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8 |
| TACH | PURPLE/WHITE (AC) | @ ECM, (BLACK, 32-PIN PLUG), PIN 14, NOTE #5 |
| WAIT TO START LIGHT | N/A | |
| BRAKE | LT. GREEN to ORANGE/BLUE (+) | @ BRAKE Switch or BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2 |
| FACTORY ALARM DISARM | BLUE/RED or RED (-) Requires Double Pulse, NOTE #6 | @ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7 |
| ANTI-THEFT | NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 |
| EXTRA INFORMATION |
| NOTE #1: This vehicle is Equipped with NISSAN'S TRANSPONDER ANTI-THEFT SYSTEM, for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an Extra Ignition key. (Requires extra key for Operation) Part # XK09 for REMOTE STARTING ONLY, requires 1 key for programming, NO key required for Operation. Part # DB-ALL for REMOTE START/KEYLESS Entry, requires 1 key for programming and NO Key for Operation. To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: the BCM, (Body Control Module) is located Behind the INSTRUMENT CLUSTER. NOTE #3: this wire is Only on vehicles with LEFT Front Only Anti-Pinch Power Window Systems. On vehicles with LEFT and RIGHT Front ANTI-PINCH Power Window Systems, use the FACTORY ALARM ARM wire, it is a BLUE/BLACK or BLUE (-) located at the POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4 or 6. TEST this wire while turning the KEY in the DRIVERS DOOR. NOTE #4: this wire is Only on vehicles with LEFT Front Only Anti-Pinch Power Window Systems. On vehicles with LEFT and RIGHT Front ANTI-PINCH Power Window Systems, use the FACTORY ALARM DISARM wire, it is a BLUE/RED or RED (-) Requires a Double Pulse, located at the POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7. TEST this wire while turning the KEY in the DRIVERS DOOR. NOTE #5: the ECM, (Engine Control Module) is located in the ENGINE COMPARTMENT, next to the BATTERY. NOTE #6: On vehicles with LEFT Front ANTI-PINCH Power Window Systems Only, this wire is located in the DRIVERS KICK PANEL or at the BCM, (GREEN, 40-PIN PLUG) PIN 15, TEST this wire while turning the KEY in the DRIVERS DOOR. |