Vehicle
Wiring Details for your
2007- Cadillac Escalade Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2007- Cadillac Escalade . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
(2) RED/BLACK (+) |
@ FUSE BOX |
| STARTER |
See NOTE #1 |
|
| STARTER
2 |
N/A |
|
| IGNITION
1 |
PINK (+) |
@ IGNITION SWITCH HARNESS or BCM, LIGHT GREEN Plug, Pin 14, See NOTE #2 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
BROWN (+) |
@ IGNITION SWITCH HARNESS or BCM, LIGHT GREEN Plug, Pin 21, See NOTE #2 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
LIGHT BLUE (-) |
@ HEAD LIGHT Switch or BCM, NATURAL Plug, Pin 8, See NOTE #2 |
| PARKING
LIGHTS ( + ) |
N/A |
|
| POWER LOCK |
See NOTE #1 |
|
| POWER UNLOCK |
See NOTE #1 |
|
| DOOR TRIGGER |
See NOTE #3 |
|
| DOMELIGHT
SUPERVISION |
GRAY (+) |
@ BCM, NATURAL Plug, Pin 5, See NOTE #2 |
| TRUNK RELEASE |
PINK (-) Glass and GRAY (-) Gate See NOTE #4 |
@ BCM, PINK Plug, Pins 24 and 13, See NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
TAN (-) |
@ HORN Switch or BCM, BROWN Plug, Pin 18, See NOTE #2 |
| TACH |
ANY wire NOT PINK, BROWN or BLACK (AC) |
@ ANY FUEL-INJECTOR or IGNITION COIL |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
LIGHT BLUE/WHITE (+) |
@ SWITCH ABOVE BRAKE or BCM, BROWN Plug, Pin 6, See NOTE #2 |
| FACTORY
ALARM DISARM |
LIGHT GREEN (-) |
@ DRIVERS DOOR MODULE, BROWN 16-Pin Plug, Pin 4 |
| ANTI-THEFT |
GM'S MULTIPLEX IGNITION/TRANSPONDER SYSTEM, See NOTE #1 |
|
| EXTRA
INFORMATION |
| NOTE #1: THIS VEHCILE REQUIRES A SPECIAL INTERFACE BYPASS MODULE FOR REMOTE START
AND KEYLESS ENTRY PART #DB-ALL or XK09 and will also need PART #RFLCHGM ,
TO ORDER GO TO THE INTERFACE BYPASS MODULE PAGE ON THIS WEBSITE.
NOTE #2: The BCM (Body Control Module) is located to the LEFT of the STEERING COLUMN.
NOTE #3: The DRIVERS DOOR TRIGGER is a GRAY/BLACK (-) at the DRIVERS DOOR MODULE in
the DRIVERS DOOR, BROWN 16-Pin Plug, Pin 13, the PASSENGER DOOR TRIGER is a
BLACK/WHITE (-) at the PASSENGER DOOR MODULE in the PASSENGER DOOR,
BROWN 16-Pin Plug, Pin 13. The DRIVERS REAR DOOR TRIGGER is a LIGHT
BLUE/BLACK (-) PINK Plug, Pin 15 and the PASSENGER REAR DOOR TRIGGER is a
LIGHT GREEN/BLACK (-) PINK Plug, Pin 14 both wires are located in the PINK Plug on
the BCM, when connecting to an ALARM SYSTEM use all (4) FOUR wires and DIODE
ISOLATE, See DIAGRAM.
NOTE #4: TEST these wires while OPENING the LIFTGLASS and LIFTGATE from the HANDLE on
the REAR HATCH of the vehicle.
|
|
|
|
|
|
