Vehicle
Wiring Details for your
2006-2010 Infiniti M45 Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2006-2010 Infiniti M45 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+) |
@ CIRCUIT BREAKER, (WHITE, 2-PIN PLUG), PIN 1, NOTE #5 |
| STARTER |
RED (+) |
@ PDU, (WHITE, 6-PIN PLUG), PIN 1, NOTE #6 |
| STARTER
2 |
BROWN/WHITE (-) (PUSH-BUTTON START) |
@ PUSH-BUTTON IGNITION Switch or IKU, (WHITE, 40-PIN PLUG), PIN 39, NOTE #7 |
| IGNITION
1 |
BROWN (+) |
@ PDU, (WHITE, 6-PIN PLUG), PIN 6, NOTE #6 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
WHITE (+) |
@ PDU, (WHITE, 6-PIN PLUG), PIN 4, NOTE #6 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
RED/BLUE (+) |
in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
| POWER LOCK |
BROWN (TYPE B), NOTE #3 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4 |
| POWER UNLOCK |
PURPLE/RED (TYPE B), Requires Double Pulse, NOTE #4 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 |
| DOOR TRIGGER |
PURPLE (-) |
in DRIVERS KICK PANEL or BCM, (BLACK, 15-PIN PLUG), PIN 7, NOTE #2 |
| DOMELIGHT
SUPERVISION |
BROWN (-) |
@ BCM, (BLACK, 15-PIN PLUG), PIN 8, NOTE #2 |
| TRUNK RELEASE |
ORANGE (-) |
@ RELEASE SWITCH or BCM, (WHITE, 40-PIN PLUG), PIN 30, NOTE #2 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BROWN/WHITE (-) |
@ HORN SWITCH, (GRAY, 8-PIN PLUG), PIN 8 |
| TACH |
Any wire NOT WHITE or WHITE/BLUE (AC) |
@ Any FUEL -INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
PINK/BLUE (+) |
@ BRAKE PEDAL Switch or in DRIVERS KICK PANEL, Harness to REAR of Vehicle. |
| FACTORY
ALARM DISARM |
Use UNLOCK wire |
|
| ANTI-THEFT |
INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
|
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is equipped with INFINITI'S TRANSPONDER ANTI-THEFT System that
requires a Bypass Module for Remote Starting:
Part# 791 Bypass Module (Key Required) requires an Extra Ignition Key placed inside
module for Operation FOR REMOTE STARTING ONLY!!.
Part # DB-ALL or XK09 Interface Bypass Module (No Key Required) Either bypass is
for Remote Starting and does the door locks (keyless entry)
To order go to the INTERFACE BYPASS MODULE Page on this website.
NOTE #2: the BCM (Body Control Module) is located behind the GLOVE BOX.
NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the
FACTORY ALARM.
NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the
FACTORY ALARM.
NOTE #5: the CIRCUIT BREAKER is located under the DRIVERS DASH, behind the DATA LINK
Connector.
NOTE #6: the PDU, (Power Distribution) is located behind the INSTRUMENT CLUSTER.
NOTE #7: the IKU, (Intelligent Key Unit) is located in the DRIVERS KICK PANEL, below the FUSE
BOX.
|
|
|
|
|
|
