NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2; The KEYSENSE BLUE (-) wire can be used as a DISARM wire for the Factory Security,
a constant (-) Negative to this wire will DISARM.
NOTE #3; The BECU (Body Electronic Control Unit) is attached to the BACK of the FUSE BOX.
NOTE #4; TEST the LOCK and UNLOCK wires while turning the Key in the DRIVERS DOOR
KEY CYLINDER.
NOTE #5: The DRIVERS DOOR is a WHITE (-) at the FUSE BOX, in the TOP LEFT 30-Pin Plug,
Pin 21. The PASSENGER DOOR is a BROWN (-) at the FUSE BOX, in the TOP RIGHT
16-Pin Plug, Pin 14. The DRIVERS REAR DOOR is a LIGHT BLUE (-) in the DRIVERS
KICK PANEL, in a 20-Pin Plug, Pin 13. And the PASSENGER REAR DOOR is a LIGHT
GREEN (-) at the FUSE BOX, in the TOP LEFT 14-Pin Plug, Pin 7. When connecting
to an ALARM SYSTEM use all 4 wires and DIODE ISOLATE, See DIAGRAM.
|