Vehicle
Wiring Details for your
2006-2008 Infiniti Fx35 Wiring Diagram |
Printer Friendly Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2006-2008 Infiniti Fx35 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
|
PART |
COLOR |
LOCATION |
12 VOLT
CONSTANT |
BLUE/RED to RED (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 1 |
STARTER |
BLUE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 5 |
STARTER
2 |
PINK (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 6 |
IGNITION
1 |
BLACK (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 3 |
IGNITION
2 |
N/A |
|
IGNITION
3 |
N/A |
|
ACCESSORY/HEATER
BLOWER 1 |
WHITE (+) |
@ IGNITION SWITCH, (WHITE, 6-PIN PLUG), PIN 2 |
ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
KEYSENSE |
N/A |
|
PARKING
LIGHTS ( - ) |
N/A |
|
PARKING
LIGHTS ( + ) |
RED to WHITE (+) |
in DRIVERS KICK PANEL, (WHITE, 12-PIN PLUG), PIN 2 |
POWER LOCK |
PINK (TYPE B), NOTE #3 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4 |
POWER UNLOCK |
ORANGE (TYPE B), Requires Double Pulse, NOTE #4 |
@ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 |
DOOR TRIGGER |
WHITE (-) |
@ BCM, (BLACK, 15-PIN PUG), PIN 7 |
DOMELIGHT
SUPERVISION |
PURPLE/WHITE (-) |
@ BCM, (BLACK, 15-PIN PUG), PIN 8 |
TRUNK RELEASE |
YELLOW (-), NOTE #5 |
@ BACK DOOR OPENER Switch on Hatch |
SLIDING
POWER DOOR |
N/A |
|
HORN |
GREEN/BLACK to LT. BLUE (-) |
@ HORN Switch, in Steering Column |
TACH |
Any wire NOT RED (AC) |
@ Any FUEL-INJECTOR |
WAIT TO
START LIGHT |
N/A |
|
BRAKE |
PINK (+) |
@ BRAKE PEDAL Switch or in DRIVERS KICK PANEL, Harness to REAR of Vehicle |
FACTORY
ALARM DISARM |
Use UNLOCK wire |
|
ANTI-THEFT |
INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1 |
TRANSPONDER @ IGNITION SWITCH TUMBLER |
EXTRA
INFORMATION |
NOTE #1 This vehicle is Equipped with a TRANPONDER ANTI-THEFT System that will requires a Bypass Module for REMOTE STARTING:
Part # 791 Bypass Module will work IF you have another IGNITION key that you can give up, this key will need to be placed inside the 791 Bypass Module and be left there for Remote Starting.
Part # DB-ALL or XK09 is a Keyless Bypass Module used for Remote Starting that DOES NOT require a Key to be left inside the bypass module. To order go to the INTERFACE BYPASS MODULE PAGE on this website.
NOTE #2: the BCM (Body Control Module) is located in the DRIVERS KICK PANEL.
NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the
FACTORY ALARM.
NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the
FACTORY ALARM.
NOTE #5: TEST this wire while opening the HATCH with the Handle on the REAR of the Vehicle.
On vehicles with INTELLIGENT KEY, it is a LT. GREEN (-) located in the DRIVERS KICK
PANEL, Harness to REAR of Vehicle.
|
|
|
|
|