| NOTE #1: This vehicle is with MAZDA'S TRANSPONDER ANTI-THEFT SYSTEM,
for REMOTE STARTING ONLY you will need the Part #791 BYPASS Module and an
Extra Ignition key. (Requires extra key for Operation)
Part # PK-ALL or PKFM for REMOTE STARTING ONLY, requires 2 keys for
programming, NO key required for Operation.
Part # DB-ALL for Remote Starting and Keyless Entry operation (no resistors
required), 2 keys required for programming, no key required for Operation.
To Order the go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: The BCM is located behind the GLOVE BOX.
NOTE #3: LOCK requires a (-) Negative thru a 1000 Ohm Resistor and UNLOCK requires a straight (-) Negative, to connect See DIAGRAM.
NOTE #4: The DRIVERS DOOR Trigger is a BLUE/BLACK (-) at Pin 5G, the PASSENGER DOOR Trigger RED/YELLOW at Pin 5E. The REAR SLIDING DOORS are GREEN/ORANGE (-) at Pin 5C.When connecting to an ALARM System, use all 3 wires See DIAGRAM