Service: 954-728-9571
Items: 0 - Total: $0.00
See Cart | Check Out
About Us
What's New
Products
Contact Us
Current Specials!
Ordering Information
Our Terms
Shipping Information
Commando and Your Privacy

Search Again?

 

Need Installation?
Locate An Installer Near You That's Commando Authorized.
Are You An Installer?
Get Listed In our Commando Installer Database and Receive Installation Leads For Free!

Diagrams
Tech Support Home
Ignition & Starter
Starter Kill (3 Wire Harness)
(Download)
-------------------
Starter Kill (5 Wire Harness)
(Download)
-------------------
2nd Starter Wire Relay
(Download)
-------------------
Isolating Starter and Ignition Wires
(Download)
-------------------
Door Locks
Negative Pulse Door Locks
(Download)
-------------------
Positive Pulse Door Locks

(Download)
-------------------

Reverse Polarity Door Locks
(Download)
-------------------
Vacuum Type Door Locks
(Download)
-------------------
Mercedes Vacuum Door Locks
(Download)
-------------------
Toyota Child Safety Locks
(Download)
-------------------
Dodge Caravan Power Locks (Single Wire)

(Download)
-------------------
Ford Probe Door Locks
(Download)
-------------------
Door Lock Actuators
(Download)
-------------------
Trunk & Dome
Trunk Release Configurations
(Download)
-------------------
Domelight Supervision
(Download)
-------------------
Item Links!
Car Alarms
Car Alarm Combos
Alarm Acessories
Remote Car Starters
Keyless Entry
Motorcycle Alarms
Power Windows
Switch Kits
Tailgate Locks
Power Locks
Backup Alarms
Shaved Door Handles
FREE Vehicle Wiring
Diagrams & Charts
Select Your Make


Vehicle Wiring Details for your
2005-2007 Jeep Liberty Wiring Diagram
Printer Friendly
Version
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2005-2007 Jeep Liberty . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.


 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED (+) (X2)   @ IGNITION SWITCH HARNESS
 STARTER  LIGHT BLUE/RED (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  PINK/LIGHT GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  PINK/YELLOW (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  PINK/YELLOW (+)  @ IGNITION SWITCH HARNESS
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  PINK/RED (-) See NOTE #2  @ HEADLIGHT Switch or BCM, 22-PIN Plug Pin 5, See NOTE #5
 PARKING LIGHTS ( + )  DO NOT USE!!!  
 POWER LOCK  TAN/DARK BLUE (1-Wire Door Lock System) See NOTE #3  @ BACK of FUSEBOX, TOP LEFT Plug, Pin 14
 POWER UNLOCK  Same wire, See DIAGRAM  See DIAGRAMS
 DOOR TRIGGER  See NOTE #4  @ BCM, See NOTE #5
 DOMELIGHT SUPERVISION  BLACK/WHITE (-) or YELLOW/LIGHT BLUE (-) Requires Part #775 Relay  @ BACK of FUSEBOX, TOP LEFT Plug, Pin 30
 TRUNK RELEASE  LIGHT GREEN/WHITE (-)  @ BCM, 26-PIN PLUG, PIN 17, See NOTE #5
 SLIDING POWER DOOR  N/A  
 HORN  DARK GREEN/PURPLE (-)  @ HORN SWITCH
 TACH  Any wire NOT RED/ORANGE or PINK/GRAY, (AC)  @ ANY FUEL-INJECTOR or IGNITION COIL
 WAIT TO START LIGHT  N/A  
 BRAKE  WHITE/TAN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   DISARMS with FACTORY REMOTE ONLY!!!  
 ANTI-THEFT  TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1  TRANSPONDER @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1; This vehicle requires the 791 BYPASS MODULE for REMOTE STARTING, an Extra Ignition key is also required and will need to be placed inside the 791 for Operation. Part # DB-ALL or Part # XK09, either will bypass the Anti-Theft Without the extra key need and will also do keyless entry without the resistors. to order please go to the SECURITY BYPASS MODULE Page on this website. NOTE #2: the PARKING LIGHTS require a (-)Negative thru a 910 Ohm Resistor and an extra Relay part #775, to connect, See DIAGRAM NOTE #3: to LOCK requires a (-)Negative thru a 1400 Ohm Resistor and UNLOCK requires a (-)Negative thru a 426 Ohm Resistor, some units will also require 2 extra relays part #775, to connect, See DIAGRAM NOTE #4: the DRIVERS DOOR is a TAN (-) in the GRAY 26-PIN plug, pin 4, the PASSENGER DOOR is a TAN/RED (-) in the GRAY 26-PIN plug, pin 5, the DRIVERS REAR DOOR is a TAN/ORANGE (-) in the GRAY 22-PIN plug, pin 3, the PASSENGER REAR DOOR (-) is a TAN/YELLOW (-) is a TAN/YELLOW (-) in the GRAY 26-PIN plug, pin 22. When connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM NOTE #5; THE BCM (Body Control Module) IS ATTACHED TO THE LEFT OF THE FUSE BOX.
 
Shop By Category!
Security Systems
Keyless Entry
Remote Starters
Power Door Locks
Power Windows
Shaved Door Handles
SPAL Cooling Fans
Solenoids & Actuators
Alarm Sensors
Installation Accessories
Keyword Search
 
Go Search!
Precision Search
Brand Search

 

 

View Details... Astra 777 2 Way Car Alarm w/ LCD Pager and Keyless Entry w/ Relay Pack
$99.95

View Details... 2000RS Remote Starter with Keyless Entry
$69.98

View Details... CrimeStopper RS4 Remote Start and Full Keyless Entry System
$123.99

View Details... Commando 357 Car Alarm
$45.00

View Details... Commando DL-100 Car Alarm, Keyless Entry Upgrade
$59.00

View Details... Car Alarms w/ LCD 2 Way Pager and Keyless Entry
$89.95

View Details... Avatal 3001L OEM security upgrade
$93.98

View Details... Commando 550-S Car Alarms with Full Keyless Entry
$59.99

View Details... CrimeStoppers - RS1 1-way Remote Starter and full keyless Entry System
$74.99

View Details... 2 Door Power Lock Kit with G20 Keyless Entry and Alarm
$89.99