NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.
NOTE *2 TEST THESE WIRES BY TURNING KEY IN DRIVERS DOORLOCK CYLINDER.
NOTE *3 THE DRIVERS FRONT DOOR TRIGGER IS LIGHT BLUE(-) IN PIN 62. THE FRONT PASSENGER DOOR IS BROWN/WHITE(-) IN PIN 12. THE LEFT REAR DOOR IS RED/BLACK(-) IN PIN 63. THE RIGHT REAR DOOR IS BLUE/RED(-) IN PIN 13. WHEN CONNECTING TO AN ALARM SYSTEM USE ALL 4 DOOR TRIGGER WIRES AND DIODE ISOLATE, TO CONNECT, SEE DIAGRAM.
NOTE *4 the BCM (Body Control Module) is located between the STEERING COLUMN and the FUSE BOX.
|