NOTE #1: This vehicle is equipped with PONTIAC'S PASSLOCK 2 ANTI-THEFT SYSTEM and will Require a Bypass Module for Remote Starting:
To order this part 791 BYPASS MODULE, go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: the BCM (Body Control Module) is located ABOVE the DRIVERS KICK PANEL.
NOTE #3: if vehicle is NOT equipped with a FACTORY KEYLESS ENTRY, the Door Locks are a TYPE C with the wires located in each kick panel, you must use the Passenger Switch as the Master Switch. Vehicles with factory keyless are TYPE A Systems.
NOTE #4: this vehicle has a GREEN/BLACK (-) Pin A7 for the DRIVERS DOOR and a LIGHT BLUE (-) Pin A8, for the PASSENGER DOOR(S) these wires are located at the BCM. When connecting to an ALARM SYSTEM, use both DOOR TRIGGER wires and DIODE ISOLATE. to connect, See DIAGRAM
NOTE #5: the IGNITION CONTROL MODULE is located on the DRIVERS SIDE TOP of the ENGINE.
|