NOTE #1: This vehicle may be equipped with CHRYSLER'S ANTI-THEFT TRANSPONDER System
(GRAY IGNITION KEY), if so to remote start will require the 791 BYPASS MODULE and
an extra Ignition key, to order go to the SECURITY BYPASS MODULE PAGE on this
website.
NOTE #2: this vehicle uses a 1-Wire Door Locking system, if vehicle is WITHOUT a FACTORY
ALARM SYSTEM, LOCK requires a (-)Negative thru a 1000 Ohm Resistor and UNLOCK
is a (-)Negative thru a 250 Ohm Resistor. If vehicle HAS a FACTORY ALARM SYSTEM,
ARM/LOCK is a (-)Negative thru a 2700 Ohm Resistor and DISARM/UNLOCK is a
(-)Negative thru a 7500 Ohm Resistor, some units will require 2 extra relays part
#775, to connect, See DIAGRAM.
NOTE #3: the DRIVERS DOOR is a TAN/BLACK (-) and the PASSENGER DOOR is a LIGHT
BLUE/ORANGE (-) when connecting to an ALARM SYSTEM, use both DOOR TRIGGER
wires and DIODE ISOLATE, to connect, See DIAGRAM
NOTE #4: the KEYLESS ENTRY MODULE is located in the Center of the Dash, remove top of
dash to access.
|