NOTE #1: Equipped with GM's PK3 TRANSPONDER ANTI-THEFT System Requires part # 791
BYPASS MODULE and an extra ignition key for Remote Starting operation
to order go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: The LAMP CONTROL Module is located to the RIGHT of the steering column and is
bolted to the back side of the dash.
NOTE #3: use the TAN (-) in the DRIVERS DOOR at the DOOR Module, BLACK 12-pin plug,
Pin C. For the PASSENGER DOOR, use the LIGHT GREEN (-) in the PASSENGER DOOR
at the DOOR Module, BLACK 12-pin plug pin C. the DRIVERS REAR DOOR is a DARK
BLUE/WHITE (-) and the PASSENGER REAR DOOR is a YELLOW/BLACK (-) located at the
REAR DOOR MODULE under the REAR SEAT, GRAY Plug, pins A7 and A5, when
connecting to an ALARM SYSTEM, use all 4 WIRES and DIODE ISOLATE, See DIAGRAM.
NOTE #4: the PCM is under the hood in the AIR CLEANER HOUSING, in a CLEAR Plug pin 8.
|