NOTE #1: the BCM (Body Control Module) is located in the DRIVERS KICK PANEL
NOTE #2: this vehicle uses a 1-Wire Door Locking System, a (-)Negative thru a 1500 Ohm
Resistor will LOCK and a (-)Negative thru a 250 Ohm Resistor will UNLOCK, some
units will also require 2 extra relays part #775, to connect, See DIAGRAM
NOTE #3: the Drivers door trigger is a TAN (-) Pin 6 and the passenger door trigger is a
TAN/RED (-) Pin 7. When connecting to an ALARM SYSTEM, use both DOOR TRIGGER
wires and DIODE ISOLATE. to connect, See DIAGRAM
NOTE #4: this vehicle Disarms with a (-) Negative thru a 2210 Ohm resistor and an extra relay
part #775, to connect. See DIAGRAM
|