NOTE #1: This vehicle MAY BE equipped with a Special Anti-theft key, to remote start you will
need a Bypass module 791,(use this module IF you have a extra ignition key to
place inside the 791 to remote start, if you do not have an extra key to use or wish
not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE
BYPASS MODULE that does not require a key to be placed inside the bypass module,
this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE
BYPASS MODULE PAGE on this website.
NOTE #2: This vehicle has (2) door trigger wires, when connecting to an ALARM SYSTEM,
use both wires and DIODE ISOLATE, to connect, See DIAGRAM
NOTE #3: The IGNITION SWITCH MUST be turned on before the Brake wire will test properly.
NOTE #4: The FACTORY KEYLESS ENTRY Module (if so equipped) is located behind and to
the right of the GLOVE BOX.
|