NOTE #1: If vehicle is equipped with PASSKEY/VATS, Ignition Key will have a little Chip
on the Steel Shaft of the Key that can be seen. Requires 791 Bypass Module
for Remote starting
to order go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: The TAN wire will UNLOCK the DRIVERS door and the GREY/BLACK will UNLOCK the
PASSENGER door. Both wires must be wired in as a TYPE C SYSTEM and use a relay for
each wire.
NOTE #3: This vehicle uses (2) separate door triggers wires, when installing a ALARM SYSTEM
use both wires and DIODE ISOLATE.
NOTE #4: The PCM (Power Control Module) is located under the hood on the PASSENGER inner
fender at the FIREWALL. On the V-6 the TACH wire is located in Pin 54, and on the
V-8 it is in Pin 10
|