NOTE #1: This vehicle MAY BE equipped with a Special Anti-theft key, to remote start you will
need a Bypass module 791, use this module IF you have a extra ignition key to
place inside the 791 to remote start, if you do not have an extra key to use or wish
not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE
BYPASS MODULE that does not require a key to be placed inside the bypass module,
this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE
BYPASS MODULE PAGE on this website.
NOTE #2: the FACTORY KEYLESS ENTRY Module is located behind the GLOVE BOX, this
wire flashes the hazard lights.
NOTE #3; these wires must be isolated with 2 relay part #775, so that the headlights do
not operate with the parking lights. See DIAGRAM.
NOTE #4: the BLACK/RED (-) is for the drivers door, and the BLACK/GREEN (-) is for the
passenger door, when connecting to an ALARM SYSTEM us both wires and DIODE
ISOLATE. For Dome Light Supervision use the BLACK/RED (-) is for the drivers door.
To get to these wires, pull the fuse panel down and remove the cover.
|