NOTE #1; This vehicle uses GM's PASSLOCK 2 ANTI-THEFT SYSTEM and requires the 791
Bypass Module to REMOTE START,
to order please go to the SECURITY BYPASS MODULES page on this website.
NOTE #2: The IGNITION #2 wire MUST be connected to prevent an CHECK ENGINE LIGHT and
prevent DAMAGE to the AUTOMATIC TRANSMISSION.
NOTE #3: The BCM is located to the right of the GAS Pedal, below the Radio, the plugs on the
BCM, face the drivers side of the vehicle.
NOTE #4: Use TAN (-) for the Drivers door, PURPLE PLUG, PIN B4, ORANGE (-) for the
Passengers door, PURPLE PLUG, PIN B2, when installing an Alarm use both wires and
diode isolate.
NOTE #5: The PCM is located on the Passanger side fender. For the 2.2L Engine the wire is
located in a BLACK 8-PIN PLUG, PIN 10. On the 4.3L Engine, the wire is in a RED,
32-PIN PLUG, PIN 20.
|