NOTE #1: This vehicle uses GM'S PASSLOCK 2 ANTI-THEFT SYSTEM that requires a 791 Bypass
Module to Remote Start,
to order go to the SECURITY BYPASS MODULES Page on this website.
NOTE #2: on vehicles with REAR LIFT WINDOWS it is a (+) Positve system, on vehicles with
the CARGO DOORS it is a 5-Wire System See DIAGRAM
NOTE #3: the ECM (Electronic Control Module) is located on the DRIVERS SIDE INNER FENDER,
the TACH wire is in a BLACK Plug marked WHITE.
NOTE #4: when hooking up a remote starter, if you cannot get the (+) or (-) Wait to Start wire
on the Remote Starter to work properly, you will then need to disconnect this wire
and Program the Remote Starter for the 5, 10, 15 or 20 Second Wait to Start
Timmer in the Installation manual.
NOTE #5: IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for
REMOTE STARTING!!!!!!
|