Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1996- Mercedes Benz S 600 . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
Connect to BATTERY
STARTER
PURPLE (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
PINK/BLACK/GREEN (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
PINK/YELLOW (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
PINK/YELLOW (+)
IGNITION SWITCH HARNESS
KEYSENSE
N/A
PARKING
LIGHTS ( - )
N/A
PARKING
LIGHTS ( + )
GRAY/RED (+) and GRAY/WHITE (+) use both, See NOTE *1
@ HEADLIGHT SWITCH, See DIAGRAM
POWER LOCK
BLUE/GRAY (TYPE B)
IN DRIVERS KICK PANEL
POWER UNLOCK
BLUE (TYPE B)
IN DRIVERS KICK PANEL
DOOR TRIGGER
BROWN/GRAY (-) and BROWN/RED (-) Use both, See NOTE *2
@ PASSENGER PIN SWITCHES
DOMELIGHT
SUPERVISION
BROWN/GRAY (-)
@ PASSENGER DOOR PIN SWITCH
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
N/A
TACH
BLUE/GRAY
@ IGNITION COIL
WAIT TO
START LIGHT
N/A
BRAKE
BLACK/RED/WHITE (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
DISARMS WITH UNLOCK
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 this vehicle uses 2 parking Light wires to connect will require 2 extra relays Part #775, See DIAGRAM,
NOTE *2 this vehicle has 2 Door Trigger wires, when connecting to an ALARM SYSTEM, use both and DIODE ISOLATE, to connect, See DIAGRAM.