NOTE #1: If vehicle is equipped with PASSKEY/VATS, Ignition Key will have a little Chip
on the Steel Shaft of the Key that can be seen. Requires 791 Bypass Module
for Remote starting
to order go to the SECURITY BYPASS MODULE Page on this website.
NOTE #2: The TAN (-) wire is the DRIVERS DOOR located in the drivers door harness. the DARK
BLUE (-) is located LOW in the DRIVERS KICK PANEL and it is for all other doors. for
an alarm use both and diode isolate. See DIAGRAM
NOTE #3: The BCM is located behind the GLOVEBOX with the wires exiting down.
|