NOTE *1 Remove the KNEE BOLSTER from dash to access the IGNITION SWITCH HARNESS.
NOTE *2 this vehicle uses 2 parking Light wires, to connect will require 2 extra relays Part #775, to connect, See DIAGRAM
NOTE *3 the BROWN/GRAY(-) wire is at the Drivers pin switch and the BROWN/RED (-) wire is at the Drivers Rear Pin switch. You can also use the WHITE/PINK (-) for the front doors and the for the BROWN/PINK (-) for Rear doors at the THEFT MODULE in the trunk. When connecting to an ALARM SYSTEM, use all 4 DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM
NOTE *4 the THEFT MODULE is located in the trunk behind the liner on the Right side.
|