Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 1994 -1997 Ford Aspire . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
PART
COLOR
LOCATION
12 VOLT
CONSTANT
BLACK/WHITE (+)
IGNITION SWITCH HARNESS
STARTER
WHITE (+)
IGNITION SWITCH HARNESS
STARTER
2
N/A
IGNITION
1
BLUE (+)
IGNITION SWITCH HARNESS
IGNITION
2
N/A
IGNITION
3
N/A
ACCESSORY/HEATER
BLOWER 1
BLACK/RED (+)
IGNITION SWITCH HARNESS
ACCESSORY/HEATER
BLOWER 2
N/A
KEYSENSE
N/A
PARKING
LIGHTS ( - )
GREEN (-)
@ 21 PIN CONNECTOR AT STEERING COLUMN HARNESS
PARKING
LIGHTS ( + )
RED/BLACK (+)
IN DRIVERS KICK PANEL @ Small Harness
POWER LOCK
ADD ACTUATOR See NOTE *1
TO ALL DOORS See DIAGRAM
POWER UNLOCK
ADD ACTUATOR See NOTE *1
TO ALL DOORS See DIAGRAM
DOOR TRIGGER
RED/WHITE (-)
IN DRIVERS KICK PANEL, AT WHITE CONNECTOR
DOMELIGHT
SUPERVISION
USE DOOR TRIGGER, Requires Part #R30-H Relay
TRUNK RELEASE
N/A
SLIDING
POWER DOOR
N/A
HORN
RED/BLACK (-)
@ RELAY, HIGH UP IN DRIVERS KICK
TACH
WHITE
@ DISTRIBUTOR
WAIT TO
START LIGHT
N/A
BRAKE
GREEN (+)
@ SWITCH ABOVE BRAKE PEDAL
FACTORY
ALARM DISARM
N/A
ANTI-THEFT
N/A
EXTRA
INFORMATION
NOTE *1 This vehicle DOES NOT come from the Factory with Power Door Locks, by adding a Door Lock Actuators (2) of Part # 742 or the Door Lock Actuator Kit Part #745, you can add Power Door Locks to get a Keyless Entry to work on this vehicle.
