| NOTE #1: If equipped with FACTORY KEYLESS ENTRY, Vehicle is a TYPE "B" Door Locking
System, WITHOUT FACTORY KEYLESS, This is a TYPE C Door Locking System and
you MUST get the lock and unlock wires in the PASSENGER KICK PANEL (Parking
Brake Braket is in the way) you MUST also TEST for SWITCH and MOTOR wires
ONLY with the DRIVERS DOOR SWITCH. On this TYPE C System you MUST TEST
from the DRIVERS DOOR Switch only when testing for SWITCH and MOTOR wires.
NOTE #2: The DIESEL TACH wire is a WHITE/PINK and the WAIT TO START is a BLACK/PINK
(-) both wires are located at the PCM (Powertrain Control Module) or at the MAIN
HARNESS that runs on the inside of the firewall to the left of the brake pedal. The
WAIT TO START wire MUST BE DIODE ISOLATED, to connect, See DIAGRAM.