Ford  F-Series 1994-1996
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   YELLOW (+)   @ IGNITION SWITCH HARNESS
 STARTER  RED/LIGHT BLUE (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  RED/LIGHT GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  BLACK/LIGHT GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  GRAY/YELLOW (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BROWN (+)  @ HEADLIGHT SWITCH or in DRIVERS KICK PANEL
 POWER LOCK  PINK/YELLOW (TYPE C), See NOTE #1  IN EITHER KICK PANEL
 POWER UNLOCK  PINK/LIGHT GREEN (TYPE C), See NOTE #1  IN EITHER KICK PANEL
 DOOR TRIGGER  BLACK/LIGHT BLUE (+)  IN DRIVERS KICK PANEL
 DOMELIGHT SUPERVISION  USE DOOR TRIGGER  
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  DARK BLUE (-)  @ STEERING COLUMN HARNESS
 TACH  TAN/YELLOW (AC)  @ IGNITON COIL
 WAIT TO START LIGHT  See NOTE #2  
 BRAKE  LIGHT GREEN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   DARK GREEN/PURPLE (-)  IN DRIVERS DOOR HARNESS
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE #1: If equipped with FACTORY KEYLESS ENTRY, Vehicle is a TYPE "B" Door Locking System, WITHOUT FACTORY KEYLESS, This is a TYPE C Door Locking System and you MUST get the lock and unlock wires in the PASSENGER KICK PANEL (Parking Brake Braket is in the way) you MUST also TEST for SWITCH and MOTOR wires ONLY with the DRIVERS DOOR SWITCH. On this TYPE C System you MUST TEST from the DRIVERS DOOR Switch only when testing for SWITCH and MOTOR wires. NOTE #2: The DIESEL TACH wire is a WHITE/PINK and the WAIT TO START is a BLACK/PINK (-) both wires are located at the PCM (Powertrain Control Module) or at the MAIN HARNESS that runs on the inside of the firewall to the left of the brake pedal. The WAIT TO START wire MUST BE DIODE ISOLATED, to connect, See DIAGRAM.