Vehicle
Wiring Details for your
2010-2011 Ford Taurus Wiring Diagram |
Printer Friendly
Version |
|
|
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2010-2011 Ford Taurus . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections. More information on using a multimeter and testing wires please see our Technical Support Area.
|
|
|
 |
| PART |
COLOR |
LOCATION |
| 12 VOLT
CONSTANT |
RED (+), Note #2 |
@ SJB, (BLACK 1-PIN PLUG(G), PIN 1 |
| STARTER |
BLUE/WHITE (+) Note #3 |
@ IGNITION SWITCH, (BLACK 7-PIN PLUG), PIN 7 |
| STARTER
2 |
BROWN/PURPLE(-) (SS1), YELLOW/ORANGE(-) (SS2) (INTELLIGENT ACCESS) Note #4 |
@ START/STOP Switch, (BLACK 6-PIN PLUG) PINS 6 and 4 |
| IGNITION
1 |
GREEN/PURPLE (+) Note #5 |
@ IGNITION SWITCH, (BLACK 7-PIN PLUG), PIN 1 |
| IGNITION
2 |
N/A |
|
| IGNITION
3 |
N/A |
|
| ACCESSORY/HEATER
BLOWER 1 |
PURPLE/GREEN (+) Note #6 |
@ IGNITION SWITCH, (BLACK 7-PIN PLUG), PIN 6 |
| ACCESSORY/HEATER
BLOWER 2 |
N/A |
|
| KEYSENSE |
N/A |
|
| PARKING
LIGHTS ( - ) |
N/A |
|
| PARKING
LIGHTS ( + ) |
PURPLE/WHITE (+) |
@ SJB, (GRAY 13-PIN PLUG(E) PIN 6, Note #7 |
| POWER LOCK |
BLUE/GREEN (TYPE B), Note #9 |
@ SJB,(GARY 26-PIN PLUG(C) PIN 17, Note #7 and #8 |
| POWER UNLOCK |
YELLOW/PURPLE (TYPE B), Note #10 |
@ SJB,(GARY 26-PIN PLUG(C) PIN 4, Note #7 and #8 |
| DOOR TRIGGER |
GREE/PURPLR (-) N.C. Note #12 |
@ SJB,(GRAY 26-PIN PLUG(C) PIN 14, Note #7 |
| DOMELIGHT
SUPERVISION |
GRAY/PURPLE (+) |
@ SJB,(GRAY 14-PIN PLUG(C) PIN 9, Note #7 |
| TRUNK RELEASE |
BROWN/YELLOW (-) Note #13 |
@ RELEASE SWITCH or SJB,(GRAY 26-PIN PLUG(C) PIN 20, Note #7 |
| SLIDING
POWER DOOR |
N/A |
|
| HORN |
BLUE/WHITE (-) |
@ HORN SWITCH or SJB,(BLACK 52-PIN PLUG(B) PIN 41, Note #7 |
| TACH |
Any wire NOT BLUE or BLACK (AC) |
@ Any FUEL INJECTOR |
| WAIT TO
START LIGHT |
N/A |
|
| BRAKE |
PURPLE/WHITE or YELLOW/GREEN (+) |
@ BRAKE SWITCH or SJB,(BLACK 52-PIN PLUG(B) PIN 40, Note #7 |
| FACTORY
ALARM DISARM |
GREEN/PURPLE (-) (INTELLIGENT ACCESS) Note #14 |
@ DRIVERS DOOR Module, in door, (GRAY 12-PIN PLUG) PIN 12 |
| ANTI-THEFT |
FORD's TRANSPONDER SYSTEM, See Note #1 |
|
| EXTRA
INFORMATION |
| NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will
need a Bypass module 791, use this module IF you have a extra ignition key to
place inside the 791 to remote start, if you do not have an extra key to use or wish
not to have a key placed inside this bypass module, for the 2010 model we OFFER a KEYLESS INTERFACE
BYPASS MODULE that does not require a key to be placed inside the bypass module,
this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE
BYPASS MODULE PAGE on this website. If a 2011 Push to Start use #DB-ALL, if 2011 with SA stamped into metal shaft of key use PKTK interface module.
Note #2: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (BLUE 23-PIN PLUG) PIN 1.
Note #3: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (BLUE 23-PIN PLUG) PIN 2.
Note #4: On vehicles with INTELLIGENT ACCESS, these wires are located at the REMOTE
FUNCTION ACTUATOR Module, behind the Glove Box (WHITE 23-PIN PLUG) PIN 16 and
(BROWN 23-PIN PLUG), PIN 4.
Note #5: On vehicles with INTELLIGENT ACCESS, this wire is a BROWN/PURPLE (+) located at the
REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (GREEN 23-PIN PLUG)
PIN 5.
Note #6: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (GREEN 23-PIN PLUG) PIN 4.
Note #7: The SJB, (Smart Junction Box) is part of the FUXE BOX, located under the Drivers Dash.
Note #8: On vehicles with Memory, TEST this wire while pressing the PASSENGER Door Lock Switch
Note #9: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 16.
Note #10: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 17.
Note #11: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (WHITE 23-PIN PLUG) PIN 2.
Note #12: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 19.
Note #13: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION
ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 15.
Note #14: TEST this wire while turning the Key in the Drivers Door.
|
|
|
|
|
|
