Ford  Taurus 2010-2011
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED (+), Note #2   @ SJB, (BLACK 1-PIN PLUG(G), PIN 1
 STARTER  BLUE/WHITE (+) Note #3  @ IGNITION SWITCH, (BLACK 7-PIN PLUG), PIN 7
 STARTER 2  BROWN/PURPLE(-) (SS1), YELLOW/ORANGE(-) (SS2) (INTELLIGENT ACCESS) Note #4  @ START/STOP Switch, (BLACK 6-PIN PLUG) PINS 6 and 4
 IGNITION 1  GREEN/PURPLE (+) Note #5  @ IGNITION SWITCH, (BLACK 7-PIN PLUG), PIN 1
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  PURPLE/GREEN (+) Note #6  @ IGNITION SWITCH, (BLACK 7-PIN PLUG), PIN 6
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  PURPLE/WHITE (+)  @ SJB, (GRAY 13-PIN PLUG(E) PIN 6, Note #7
 POWER LOCK  BLUE/GREEN (TYPE B), Note #9  @ SJB,(GARY 26-PIN PLUG(C) PIN 17, Note #7 and #8
 POWER UNLOCK  YELLOW/PURPLE (TYPE B), Note #10  @ SJB,(GARY 26-PIN PLUG(C) PIN 4, Note #7 and #8
 DOOR TRIGGER  GREE/PURPLR (-) N.C. Note #12  @ SJB,(GRAY 26-PIN PLUG(C) PIN 14, Note #7
 DOMELIGHT SUPERVISION  GRAY/PURPLE (+)  @ SJB,(GRAY 14-PIN PLUG(C) PIN 9, Note #7
 TRUNK RELEASE  BROWN/YELLOW (-) Note #13  @ RELEASE SWITCH or SJB,(GRAY 26-PIN PLUG(C) PIN 20, Note #7
 SLIDING POWER DOOR  N/A  
 HORN  BLUE/WHITE (-)   @ HORN SWITCH or SJB,(BLACK 52-PIN PLUG(B) PIN 41, Note #7
 TACH  Any wire NOT BLUE or BLACK (AC)  @ Any FUEL INJECTOR
 WAIT TO START LIGHT  N/A  
 BRAKE  PURPLE/WHITE or YELLOW/GREEN (+)  @ BRAKE SWITCH or SJB,(BLACK 52-PIN PLUG(B) PIN 40, Note #7
 FACTORY ALARM DISARM   GREEN/PURPLE (-) (INTELLIGENT ACCESS) Note #14  @ DRIVERS DOOR Module, in door, (GRAY 12-PIN PLUG) PIN 12
 ANTI-THEFT  FORD's TRANSPONDER SYSTEM, See Note #1  
 EXTRA INFORMATION
 NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will need a Bypass module 791, use this module IF you have a extra ignition key to place inside the 791 to remote start, if you do not have an extra key to use or wish not to have a key placed inside this bypass module, for the 2010 model we OFFER a KEYLESS INTERFACE BYPASS MODULE that does not require a key to be placed inside the bypass module, this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS MODULE PAGE on this website. If a 2011 Push to Start use #DB-ALL, if 2011 with SA stamped into metal shaft of key use PKTK interface module. Note #2: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (BLUE 23-PIN PLUG) PIN 1. Note #3: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (BLUE 23-PIN PLUG) PIN 2. Note #4: On vehicles with INTELLIGENT ACCESS, these wires are located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (WHITE 23-PIN PLUG) PIN 16 and (BROWN 23-PIN PLUG), PIN 4. Note #5: On vehicles with INTELLIGENT ACCESS, this wire is a BROWN/PURPLE (+) located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (GREEN 23-PIN PLUG) PIN 5. Note #6: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (GREEN 23-PIN PLUG) PIN 4. Note #7: The SJB, (Smart Junction Box) is part of the FUXE BOX, located under the Drivers Dash. Note #8: On vehicles with Memory, TEST this wire while pressing the PASSENGER Door Lock Switch Note #9: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 16. Note #10: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 17. Note #11: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (WHITE 23-PIN PLUG) PIN 2. Note #12: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 19. Note #13: On vehicles with INTELLIGENT ACCESS, this wire is located at the REMOTE FUNCTION ACTUATOR Module, behind the Glove Box (BROWN 23-PIN PLUG) PIN 15. Note #14: TEST this wire while turning the Key in the Drivers Door.