Honda  Insight 2010-2011
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   WHITE (+)   @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 3
 STARTER  RED (+)  @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 1
 STARTER 2  N/A  
 IGNITION 1  YELLOW (+)  @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 6
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  ORANGE (+)  @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 4
 ACCESSORY/HEATER BLOWER 2  RED (+)  @ IGNITION SWITCH, (BROWN, 7-Pin Plug) Pin 5
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  GRAY (-)  @ HEADLIGHT SWITCH, (BLACK/WHITE, 12-Pin Plug) Pin 11
 PARKING LIGHTS ( + )  GRAY (+)  @ DASH FUSE BOX, (LT. GREEN/WHITE, 49-Pin Plug) Pin 42
 POWER LOCK  GREEN (TYPE B)  @ DASH FUSE BOX, (LT. GREEN, 12-Pin Plug) Pin 8
 POWER UNLOCK  WHITE (TYPE B)  @ DASH FUSE BOX, (LT. GREEN, 12-Pin Plug) Pin 1
 DOOR TRIGGER  GRAY (-)  @ DASH FUSE BOX, (LT. GREEN/WHITE, 49-Pin Plug) Pin 33
 DOMELIGHT SUPERVISION  BLUE -)  @ DASH FUSE BOX, (LT. GREEN, 8-Pin Plug) Pin 7
 TRUNK RELEASE  PINK (-)  @ DASH FUSE BOX, (LT. GREEN/WHITE, 49-Pin Plug) Pin 17
 SLIDING POWER DOOR  N/A  
 HORN  ORANGE (-)  @ HORN SWITCH, (WHITE, 20-Pin Plug) Pin 1
 TACH  N/A  
 WAIT TO START LIGHT  N/A  
 BRAKE  WHITE to LT. GREEN (+)  @ BRAKE SWITCH or DASH FUSE BOX, (LT. GREEN/WHITE, 49-Pin Plug) Pin 14
 FACTORY ALARM DISARM   GRAY (-) NOTE #2  @ DASH FUSE BOX, (LT. GREEN, 12-Pin Plug) Pin 4
 ANTI-THEFT  HONDA'S TRANSPONDER SYSTEM, See NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module: (For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation. (For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module. (For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation) 1-KEY Required for Programming. To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: TEST this wire while turning the Key in the Drivers Door.