| PART | COLOR | LOCATION |
| 12 VOLT CONSTANT | WHITE (+) | @ IGNITION SWITCH HARNESS |
| STARTER | BLACK/WHITE (+) | @ IGNITION SWITCH HARNESS |
| STARTER 2 | N/A | |
| IGNITION 1 | BLACK/YELLOW (+) | @ IGNITION SWITCH HARNESS |
| IGNITION 2 | N/A | |
| IGNITION 3 | N/A | |
| ACCESSORY/HEATER BLOWER 1 | BLACK/RED (+) | @ IGNITION SWITCH HARNESS |
| ACCESSORY/HEATER BLOWER 2 | WHITE/RED (+) | @ IGNITION SWITCH HARNESS |
| KEYSENSE | N/A | |
| PARKING LIGHTS ( - ) | BLUE (-) | @ GREEN FACTORY ALARM Plug, See NOTE *2 |
| PARKING LIGHTS ( + ) | RED/BLACK (+) | IN DRIVERS KICK PANEL |
| POWER LOCK | WHITE/BLUE (TYPE B) | IN GRAY PLUG, ABOVE DRIVERS KICK PANEL |
| POWER UNLOCK | WHITE/GREEN (TYPE B) | IN GRAY, PLUG ABOVE DRIVERS KICK PANEL |
| DOOR TRIGGER | GREEN (-) and LIGHT GREEN/RED (-) Use both | @ GREEN FACTORY ALARM PLUG, See NOTE #3 |
| DOMELIGHT SUPERVISION | GREEN (-), (Requires Part #775 Relay) | @ GREEN FACTORY ALARM PLUG, See NOTE #3 |
| TRUNK RELEASE | BLACK/YELLOW (-), (Requires Part #775 Relay) | GRAY PLUG ABOVE DRIVERS KICK PANEL |
| SLIDING POWER DOOR | N/A | |
| HORN | ORANGE (-) | @ GREEN FACTORY ALARM PLUG, See NOTE #3 |
| TACH | BLUE (AC) | @ TEST CONNECTOR NEAR BATTERY |
| WAIT TO START LIGHT | N/A | |
| BRAKE | WHITE/BLACK (+) | @ SWITCH ABOVE BRAKE PEDAL |
| FACTORY ALARM DISARM | N/A | |
| ANTI-THEFT | HONDA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 | @ IGNITION SWITCH TUMBLER |
| EXTRA INFORMATION |
| NOTE #1: HONDA'S TRANSPONDER SYSTEM, Requires Bypass Module: (For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation. (For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module. (For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation) 1-KEY Required for Programming. To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: THE DRIVERS DOOR TRIGGER IS GREEN (-),AND LIGHT GREEN/RED (-) CATCHES ALL OTHER DOORS. WHEN CONNECTING TO AN ALARM SYSTEM, USE BOTH WIRES AND DIODE ISOLATE, THESE WIRES ARE LOCATED IN THE GREEN FACTORY ALARM PLUG TO THE LEFT OF THE STEERING COLUMN, TO CONNECT, See DIAGRAM NOTE #3: THE FACTORY ALARM PLUG IS LOCATED TO THE LEFT OF THE STEERING COLUMN IN A GREEN PLUG. |