PART | COLOR | LOCATION |
12 VOLT CONSTANT | RED (+) | @ IGNITION SWITCH HARNESS |
STARTER | PURPLE (+) or YELLOW (+) | @ IGNITION SWITCH HARNESS |
STARTER 2 | N/A | |
IGNITION 1 | PINK (+) | @ IGNITION SWITCH HARNESS |
IGNITION 2 | N/A | |
IGNITION 3 | N/A | |
ACCESSORY/HEATER BLOWER 1 | ORANGE (+) | @ IGNITION SWITCH HARNESS |
ACCESSORY/HEATER BLOWER 2 | N/A | |
KEYSENSE | N/A | |
PARKING LIGHTS ( - ) | N/A | |
PARKING LIGHTS ( + ) | BROWN (+) | @ HEADLIGHT SWITCH or FUSEBOX |
POWER LOCK | LIGHT BLUE (TYPE A) | IN EITHER DOOR HARNESS |
POWER UNLOCK | BLACK/WHITE (TYPE A) | IN EITHER DOOR HARNESS |
DOOR TRIGGER | WHITE (-) | @ UNDERDASH LIGHT |
DOMELIGHT SUPERVISION | USE DOOR TRIGGER, (Requires Part #775 Relay) | |
TRUNK RELEASE | N/A | |
SLIDING POWER DOOR | N/A | |
HORN | BLACK (-) | @ STEERING COLUMN HARNESS |
TACH | PURPLE/WHITE, See NOTE #2 | @ IGNITION COIL or DISTRIBUTOR |
WAIT TO START LIGHT | DARK BLUE (-), See NOTE #1 | @ INSTRUMENT CLUSTER |
BRAKE | WHITE (+) | @ SWITCH ABOVE BRAKE PEDAL |
FACTORY ALARM DISARM | N/A | |
ANTI-THEFT | N/A |
EXTRA INFORMATION |
NOTE #1: when hooking up a remote starter, if you cannot get the (+) or (-) Wait to Start wire on the Remote Starter to work properly, you will then need to disconnect this wire and Program the Remote Starter for the 5, 10, 15 or 20 Second Wait to Start Timmer in the Installation manual. NOTE #2: the DIESEL TACH wire is a PURPLE/WHITE wire at the ECM, the ECM is located behind the glove box in a Silver box with 2 plugs. |