Gmc Envoy Xl 2002-2003 Printer Friendly Wiring Chart

Gmc Envoy Xl 2002-2003

PART	COLOR	LOCATION
12 VOLT CONSTANT	RED (+)	@ IGNITION SWITCH HARNESS
STARTER	YELLOW (+)	@ IGNITION SWITCH HARNESS
STARTER 2	N/A
IGNITION 1	PINK (+)	@ IGNITION SWITCH HARNESS
IGNITION 2	WHITE (+), See NOTE #3	@ IGNITION SWITCH HARNESS
IGNITION 3	N/A
ACCESSORY/HEATER BLOWER 1	ORANGE (+)	@ IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2	N/A
KEYSENSE	LIGHT GREEN (-)	@ IGNITION SWITCH HARNESS
PARKING LIGHTS ( - )	GRAY/BLACK (-)	@ HEADLIGHT SWITCH
PARKING LIGHTS ( + )	BROWN (+)	IN DRIVERS KICK PANEL
POWER LOCK	See NOTE #1
POWER UNLOCK	See NOTE #1
DOOR TRIGGER	GRAY/BLACK (+)	@ UNDERDASH LIGHT
DOMELIGHT SUPERVISION	TURNS ON WITH DISARM
TRUNK RELEASE	N/A
SLIDING POWER DOOR	N/A
HORN	BLACK or BLACK/YELLOW (-)	@ STEERING COLUMN HARNESS
TACH	WHITE (AC)	@ PCM, BLUE Plug Pin 49, See NOTE #2
WAIT TO START LIGHT	N/A
BRAKE	WHITE (+)	@ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM	LIGHT GREEN (-)	@ DRIVER DOOR MODULE in DRIVERS DOOR.
ANTI-THEFT	YELLOW (+), ORANGE/BLACK (-) and RED/WHITE (Not used)	GM's PASSLOCK 2 System, these wires exit the Ignition Switch Tumbler together and are in the Main Ignition Switch Harness in the Column.

EXTRA INFORMATION

NOTE #1: This vehicle will Requires a Anti-Theft Bypass Module Part GMDL-BP to connect the Door Locks and Bypass the PASSLOCK 2 System. If not connecting up the Door locks use the 791 Bypass module. NOTE #2: The PCM (Power Control Module) is located on the DRIVERS SIDE of the ENGINE. NOTE #3: IMPORTANT !!!!! this wire MUST BE CONNECTED as IGNITION #2 for REMOTE STARTING!!!!!!