Ford  Ranger 2004-2006
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   YELLOW (+)   @ IGNITION SWITCH HARNESS
 STARTER  RED/LIGHT BLUE (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  LIGHT GREEN/PURPLE (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  BLACK/LIGHT GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  GRAY/YELLOW (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  WHITE/BLACK (-)  @ SJB, Small BLACK Plug, Pin 16, See NOTE #2
 PARKING LIGHTS ( + )  BROWN (+)  @ SJB, BROWN Plug, Pin 8, See NOTE #2
 POWER LOCK  PINK/YELLOW (TYPE B)  @ SJB. LARGE BLACK Plug, Pin 5, See NOTE #2
 POWER UNLOCK  PINK/LIGHT GREEN (TYPE B)  @ SJB, LARGE BLACK Plug, Pin 9, See NOTE #2
 DOOR TRIGGER  YELLOW/BLACK (-) and GRAY/RED (-) Use both, See NOTE #3  @ SJB, See NOTE #2
 DOMELIGHT SUPERVISION  BLACK/LIGHT BLUE (+)  @ SJB, GRAY Plug, Pin 14, See NOTE #2
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  YELLOW/LIGHT GREEN to DARK BLUE (-)  @ SJB, SMALL BLACK Plug, Pin 18, See NOTE #2
 TACH  Any wire that is NOT RED (AC)  @ any IGNITON COIL or FUEL INJECTORS
 WAIT TO START LIGHT  N/A  
 BRAKE  LIGHT GREEN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   N/A  
 ANTI-THEFT  FORD'S ANTI-THEFT TRANSPONDER SYSTEM, SEE NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: This vehicle is equipped with a Special Anti-theft key, to remote start you will need a Bypass module 791, use this module IF you have a extra ignition key to place inside the 791 to remote start, if you do not have an extra key to use or wish not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE BYPASS MODULE that does not require a key to be placed inside the bypass module, this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS MODULE PAGE on this website. NOTE #2: The SJB (Smart Junction Box) is the FUSE/RELAY BOX in the PASSENGER KICK PANEL. NOTE #3: The YELLOW/BLACK (-) is for the DRIVERS DOOR, LARGE BLACK Plug, Pin 6 at the SJB and the GRAY/RED (-) is for the PASSENGER DOOR, SMALL BLACK Plug, Pin 3 of the SJB. When connecting to an ALARM SYSTEM use both DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM