Ford  F-Series Super Duty 1999-2001
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   YELLOW (+) and LIGHT GREEN/PURPLE (+)   @ IGNITION SWITCH HARNESS
 STARTER  RED/LIGHT BLUE (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  RED/BLACK (+) (use the Larger of the 2 wires)  @ IGNITION SWITCH HARNESS
 IGNITION 2  BLACK/LIGHT GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  GRAY/YELLOW (+) (use the Larger of the 2 wires)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BROWN (+)  @ HEADLIGHT SWITCH
 POWER LOCK  PINK/YELLOW (TYPE C), See NOTE #2  See NOTE #2
 POWER UNLOCK  PINK/LIGHT GREEN (TYPE C), See NOTE #2  See NOTE #2
 DOOR TRIGGER  BLACK/BLUE (+)  Located in a GREY Molex plug, to the RIGHT of the Steering column
 DOMELIGHT SUPERVISION  USE DOOR TRIGGER  
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  DARK BLUE (-)  @ STEERING COLUMN HARNESS
 TACH  WHITE/PINK, See NOTE #3  @ the INSTRUMENT CLUSTER or PCM
 WAIT TO START LIGHT  See NOTE #3  
 BRAKE  LIGHT GREEN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   N/A  
 ANTI-THEFT  MAY BE EQUIPPED WITH FORDS ANTI-THEFT SYSTEM, SEE NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: This vehicle MAY BE equipped with a Special Anti-theft key, to remote start you will need a Bypass module 791,(use this module IF you have a extra ignition key to place inside the 791 to remote start, if you do not have an extra key to use or wish not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE BYPASS MODULE that does not require a key to be placed inside the bypass module, this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE BYPASS MODULE PAGE on this website. NOTE #2: Vehicles with FACTORY KEYLESS ENTRY are a TYPE "B" Door locking system, wire are located in a GREY Molex plug on the RIGHT side of the Steering column, vehicles without FACTORY KEYLESS are a TYPE "C" Door locking system, when doing TYPE C Locks, use the DRIVERS side SWITCH when TESTING. Wires are located in the DRIVERS DOOR HARNESS. NOTE #3: On DIESELS the TACH wire is a WHITE/PINK located at the PCM (Powertrain Control Module) or at the Main Harness that runs on the inside of the firewall to the left of the brake pedal. For WAIT TO START LIGHT, do not use the wire in the vehicle, use the 5,10,15 or 20 Second PROGRAMMABLE Wait To Start Timer on the Remote Starter.