Ford  Explorer 1991-
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   YELLOW (+)   @ IGNITION SWITCH HARNESS
 STARTER  PINK (+) (1 of 2 wires)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  RED/GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  BLACK/GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  GRAY/YELLOW (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BROWN (+)  @ HEADLIGHT SWITCH or in FUSE BOX
 POWER LOCK  PINK/YELLOW (TYPE C)  IN DRIVERS KICK PANEL
 POWER UNLOCK  PINK/LIGHT GREEN (TYPE C)  IN DRIVERS KICK PANEL
 DOOR TRIGGER  BLACK/LIGHT BLUE (+)  @ UNDERDASH LIGHT
 DOMELIGHT SUPERVISION  USE DOOR TRIGGER  
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  YELLOW/LIGHT GREEN (-)  @ STEERING COLUMN HARNESS
 TACH  See NOTE #1  @ IGNITION COIL
 WAIT TO START LIGHT  N/A  
 BRAKE  LIGHT GREEN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   N/A  
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE #1: Use any wire that has a TAN STRIPE or YELLOW STRIPE at the IGNITION COIL for you TACH signal. (AC)