Dodge  Viper 2008-
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   RED (+)   @ IGNITION SWITCH HARNESS
 STARTER  YELLOW/RED (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  DARK BLUE (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  N/A  
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  WHITE (-)  @ BCM, See NOTE #1
 PARKING LIGHTS ( + )  N/A  
 POWER LOCK  NO INFORMATION AT THIS TIME  
 POWER UNLOCK  NO INFORMATION AT THIS TIME  
 DOOR TRIGGER  SEE NOTE #2  @ BCM, See NOTE #1
 DOMELIGHT SUPERVISION  TAN (-)  @ BCM, See NOTE #1
 TRUNK RELEASE  LIGHT GREEN/BLACK (+)  @ BCM, See NOTE #1
 SLIDING POWER DOOR  N/A  
 HORN  BLACK/RED (-)  @ STEERING COLUMN HARNESS
 TACH  N/A  
 WAIT TO START LIGHT  N/A  
 BRAKE  WHITE/TAN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   N/A  
 ANTI-THEFT  CHRYSLERS TRANSPONDER ANTI-THEFT SYSTEM  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: THE BCM IS LOCATED IN THE DRIVERS KICK PANEL. NOTE #2: THE LEFT FRONT DOOR IS TAN (-). THE RIGHT FRONT DOOR IS TAN/RED(-). USE BOTH WIRES AND DIODE ISOLATE BOTH.