Chrysler  Lhs 1994-1997
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   PINK/BLACK (+) and RED (+)   @ IGNITION SWITCH HARNESS
 STARTER  YELLOW/GOLD Dots (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  DARK BLUE/GOLD Dots (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  RED/WHITE/GOLD Dots (+)  @ IGNITION SWITCH HARNESS
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  BLACK/ORANGE (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  BLACK/WHITE (+)  @ IGNITION SWITCH HARNESS
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BLACK/YELLOW (+)  IN DRIVERS KICK PANEL
 POWER LOCK  ORANGE/WHITE (TYPE A)  IN WHITE PLUG, BACK OF FUSEBOX
 POWER UNLOCK  PINK/VIOLET (TYPE A)  IN WHITE PLUG, BACK OF FUSEBOX
 DOOR TRIGGER  TAN (-) and TAN/RED (-) use both, See NOTE #1  IN DRIVERS KICK PANEL, See DIAGRAM
 DOMELIGHT SUPERVISION  TAN (-), (Requires #775 Relay)  IN DRIVERS KICK PANEL
 TRUNK RELEASE  BLACK/WHITE (+)  @ TRUNK RELEASE SWITCH
 SLIDING POWER DOOR  N/A  
 HORN  BLACK/RED (-)  @ RELAY in FUSEBOX
 TACH  RED, WHITE or BLACK (AC)  @ IGNITION COIL PACK
 WAIT TO START LIGHT  N/A  
 BRAKE  WHITE (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   LIGHT GREEN/ORANGE (-)  IN EITHER KICK PANEL
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE #1: When connecting an ALARM SYSTEM, the TAN (-) is for the DRIVERS SIDE and the TAN/RED (-) is for the PASSENGERS SIDE use both wires and DIODE ISOLATE. See DIAGRAM