Chrysler  Concorde 1995-1997
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   PINK/BLACK (+)   @ IGNITION SWITCH HARNESS
 STARTER  YELLOW/GOLD Dots (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  DARK BLUE/GOLD Dots (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  RED/WHITE/GOLD Dots (+)  @ IGNITION SWITCH HARNESS
 IGNITION 3  RED/WHITE (+) (18ga. Needed only if AIR BAG LIGHT turns ON)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 1  BLACK/ORANGE (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  BLACK/WHITE (+)  @ IGNITION SWITCH HARNESS
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  BLACK/YELLOW (+)  IN DRIVERS KICK PANEL
 POWER LOCK  ORANGE/WHITE (TYPE A)  @ WHITE Plug, back of FUSEBOX
 POWER UNLOCK  PINK/VIOLET (TYPE A)  @ WHITE Plug, back of FUSEBOX
 DOOR TRIGGER  TAN (-) and TAN/RED (-) Use both, See NOTE *1  IN DRIVERS KICK PANEL
 DOMELIGHT SUPERVISION  TAN (-), (Requires #775 Relay)  IN DRIVERS KICK PANEL
 TRUNK RELEASE  BLACK/WHITE (+)  @ TRUNK RELEASE SWITCH
 SLIDING POWER DOOR  N/A  
 HORN  BLACK/RED (-)  @ STEERING COLUMN HARNESS
 TACH  GRAY (AC)  @ IGNITION COIL PACK
 WAIT TO START LIGHT  N/A  
 BRAKE  WHITE/TAN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   LIGHT GREEN/ORANGE (-)  IN EITHER KICK PANEL
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE #1: This vehicle uses 2 door triggers the TAN (-) is fro the DRIVERS SIDE and the TAN/RED (-) is for the PASSENGERS SIDE. When connecting an ALARM SYSTEM use both wires and DIODE ISOLATE. See DIAGRAM.