Acura  Cl 1997-1999
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   WHITE (+)   @ IGNITION SWITCH HARNESS
 STARTER  BLACK/WHITE (+)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  BLACK/YELLOW (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  N/A  
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  YELLOW (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  N/A  
 PARKING LIGHTS ( + )  RED/BLACK (+)  @ SECURITY MODULE, PIN A11, See NOTE #1
 POWER LOCK  RED/YELLOW (TYPE B), See NOTE #2  @ SECURITY MODULE, PIN B17, See NOTE #1
 POWER UNLOCK  RED/BLUE (TYPE B), See NOTE #2  @ SECURITY MODULE, PIN B6, See NOTE #1
 DOOR TRIGGER  BLACK/WHITE (-)  @ SECURITY MODULE, PIN 12, See NOTE #1
 DOMELIGHT SUPERVISION  Use Door Trigger wire, (Requires #775 Relay)  
 TRUNK RELEASE  BLUE/RED (5-WIRE TYPE) (Requires #775 relay)  @ SECURITY MODULE, PIN A4, See NOTE #1
 SLIDING POWER DOOR  N/A  
 HORN  BLUE/RED or LT. GREEN/BLUE (-)  @ STEERING COLUMN HARNESS
 TACH  BLUE (AC)  @ TACH TEST CONNECTOR, See NOTE #3
 WAIT TO START LIGHT  N/A  
 BRAKE  GREEN/WHITE (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM   DISARMS WITH UNLOCK  
 ANTI-THEFT  N/A  
 EXTRA INFORMATION
 NOTE #1: The SECURITY MODULE is located under the Passenger Seat. NOTE #2: TEST these wires while Turning the Key in the Passenger Door Lock Cylinder. NOTE #3: The TACH TEST CONNECTOR is located on the passenger side of the engine compartment by the firewall, taped to a harness, in a 2-pin plug.