Toyota  Yaris 2006-2008
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   YELLOW (+) and GRAY (+)   @ IGNITION SWITCH HARNESS
 STARTER  BLACK (+) (2)Wires both are common)  @ IGNITION SWITCH HARNESS
 STARTER 2  N/A  
 IGNITION 1  PINK (+)  @ IGNITION SWITCH HARNESS
 IGNITION 2  GREEN (+)  @ IGNITION SWITCH HARNESS
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  WHITE (+)  @ IGNITION SWITCH HARNESS
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  YELLOW (-)  @ IGNITION SWITCH HARNESS
 PARKING LIGHTS ( - )  WHITE (-)  @ HEADLIGHT SWITCH
 PARKING LIGHTS ( + )  GREEN (+)  @ FUSE BOX, TOP LEFT 30-Pin Plug, Pin 29
 POWER LOCK  BROWN (TYPE B), See NOTE #3  IN DRIVERS KICK PANEL, 20-Pin Plug, Pin 7
 POWER UNLOCK  YELLOW to GREEN (TYPE B) (Requires Double Pulse)  IN DRIVERS KICK PANEL, 20-Pin Plug, Pin 8
 DOOR TRIGGER  See NOTE #4  @ FUSE BOX, TOP LEFT 30-Pin Plug
 DOMELIGHT SUPERVISION  PINK (-), (Requires Part #775 Relay)  @ FUSE BOX, LEFT SIDE, 6-Pin Plug, Pin 2
 TRUNK RELEASE  N/A  
 SLIDING POWER DOOR  N/A  
 HORN  BLACK to LIGHT GREEN (-)  @ FUSE BOX, TOP 36-Pin Plug, Pin 28
 TACH  LIGHT GREEN  @ DATA LINK Connector, under drivers dash, Pin 9
 WAIT TO START LIGHT  N/A  
 BRAKE  GREEN to PURPLE (+)  @ FUSE BOX, TOP LEFT, 30-Pin Plug, Pin 12
 FACTORY ALARM DISARM   DISARMS with UNLOCK, See NOTE #2  
 ANTI-THEFT  TOYOTA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module: (For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation. (For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module. (For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation) 1-KEY Required for Programming. To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: The KEYSENCE YELLOW (-) wire can be used as a DISARM wire for the Factory Security, a constant (-) Negative to this wire will DISARM. NOTE #3: TEST the LOCK and UNLOCK wires while turning the Key in the DRIVERS DOOR KEY CYLINDER. NOTE #4: The DRIVERS DOOR is a RED (-) Pin 21. The PASSENGER DOOR is a BLUE (-) Pin 24. The DRIVERS REAR DOOR is a GREEN(-) Pin 5. And the PASSENGER REAR DOOR is a BLUE (-), Pin 20. When connecting to an ALARM SYSTEM use all 4 wires and DIODE ISOLATE.