| NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module.
(For Remote Starting/Door Locks) Part # DB-ALL (No Extra Key Required for Operation)
1-KEY Required for Programming.
To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS
MODULE Page on this website.
NOTE #2: THIS VEHICLE WILL REQUIRE AN EXTRA RELAY, PART #775 AND DIODES
TO DO THE KEYLESS ENTRY FUNCTION, to connect, See DIAGRAM
NOTE #3; THE BECU (Body Electronic Control Unit) IS LOCATED ABOVE THE DRIVERS
KICK PANEL
NOTE #4: THE (2) DRIVER SIDE DOOR TRIGGER WIRES, ARE IN A 14-PIN PLUG IN THE
DRIVER KICK PANEL. DRIVER DOOR TRIGGER, IS GRAY/RED(-) IN PIN 14 , THE
DRIVERS REAR DOOR IS RED/WHITE(-) IN PIN 13 . THE (2) PASSENGER SIDE
DOOR TRIGGER WIRES, ARE IN A 14PIN PLUG IN THE PASSENGER KICK PANEL .
THE PASSENGER SIDE DOOR IS GREEN/BLACK(-) IN PIN 14, AND THE PASSENGER
REAR DOOR IS RED/WHITE(-) IN PIN 5 . WHEN CONNECTING TO AN ALARM
SYSTEM, USE ALL (4) DOOR TRIGGER WIRES AND DIODE ISLOATE, TO CONNECT,
SEE DIAGRAM
NOTE #5: THE ECM (Engine Control Module) IS LOCATED ABOVE THE DRIVERS KICK PANEL
NOTE #6: THE KEYSENSE WIRE WILL DISARM THE VEHICLE WITHOUT UNLOCKING THE
DOORS BY APPLYING A (-)NEGATIVE TO THIS WIRE DURING REMOTE STARTING.
|