| PART | COLOR | LOCATION |
| 12 VOLT CONSTANT | WHITE (+) | @ IGNITION SWITCH HARNESS |
| STARTER | RED (+) | @ IGNITION SWITCH HARNESS |
| STARTER 2 | N/A | |
| IGNITION 1 | BLACK/WHITE (+) | @ IGNITION SWITCH HARNESS |
| IGNITION 2 | BLACK/YELLOW (+) | @ IGNITION SWITCH HARNESS |
| IGNITION 3 | N/A | |
| ACCESSORY/HEATER BLOWER 1 | BLUE/RED (+) | @ IGNITION SWITCH HARNESS |
| ACCESSORY/HEATER BLOWER 2 | N/A | |
| KEYSENSE | BLUE/BLACK (-) | @ IGNITION SWITCH HARNESS |
| PARKING LIGHTS ( - ) | GREEN/WHITE (-) | @ HEAD LIGHT SWITCH |
| PARKING LIGHTS ( + ) | GREEN (+) | IN DRIVERS KICK PANEL, HARNESS TO REAR OF VEHICLE |
| POWER LOCK | GREEN (TYPE B), See NOTE #2 | IN DRIVERS KICK PANEL, BLUE, 12-PIN PLUG |
| POWER UNLOCK | BLUE/YELLOW (TYPE B) (Requires Double Pulse) | IN DRIVERS KICK PANEL, BLUE, 12-PIN PLUG |
| DOOR TRIGGER | RED/WHITE (-) | @ INTERIOR LIGHT SWITCH, on DASH |
| DOMELIGHT SUPERVISION | RED/BLACK (-), (Requires Part #775 Relay) | @ INTERIOR LIGHT SWITCH, on DASH |
| TRUNK RELEASE | BLUE/WHITE (-), (Requires Part #775 Relay) | @ HATCH RELEASE SWITCH |
| SLIDING POWER DOOR | N/A | |
| HORN | GREEN/YELLOW (-) | @ STEERING COLUMN HARNESS |
| TACH | BLACK (AC) | @ ECM, See NOTE #3 |
| WAIT TO START LIGHT | N/A | |
| BRAKE | GREEN/WHITE (+) | @ SWITCH ABOVE BRAKE PEDAL |
| FACTORY ALARM DISARM | DISARMS with KEYSENSE wire, See NOTE #4 | @ IGNITION SWITCH HARNESS |
| ANTI-THEFT | TOYOTA'S TRANSPONDER ANTI-THEFT SYSTEM, See NOTE #1 | @ IGNITION SWITCH TUMBLER |
| EXTRA INFORMATION |
| NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module on Model year 2005-2008 (For Remote Starting Only) Part #791 Bypass, Requires Extra Key for Operation, (For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module. To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: you must TEST the LOCK and UNLOCK wires, while TURNING the KEY in the DRIVERS DOOR KEY CYLINDER. NOTE #3: the ECM (Engine Control Module0 is located behind the GLOVE BOX. NOTE #4: THE KEYSENSE WIRE WILL DISARM THE VEHICLE WITHOUT UNLOCKING THE DOORS BY APPLYING A (-)NEGATIVE TO THIS WIRE DURING REMOTE STARTING. |