Toyota  FJ Cruiser 2007-2011
 PART   COLOR  LOCATION
 12 VOLT CONSTANT   BLUE/BLACK (+)   @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 7
 STARTER  GREEN/BLACK (+)  @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 8
 STARTER 2  BLACK/WHITE (+)  @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 1
 IGNITION 1  BLACK/RED (+)  @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6
 IGNITION 2  BLUE/YELLOW (+)  @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 4
 IGNITION 3  N/A  
 ACCESSORY/HEATER BLOWER 1  WHITE/GREEN (+)  @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 3
 ACCESSORY/HEATER BLOWER 2  N/A  
 KEYSENSE  N/A  
 PARKING LIGHTS ( - )  GREEN (-)  @ HEADLIGHT Switch or BECU, (TOP, WHITE, 26-Pin Plug) Pin 8, NOTE #2
 PARKING LIGHTS ( + )  GREEN (+)  @ DASH FUSE BOX, (WHITE, 16-Pin Plug(F) Pin 13
 POWER LOCK  GREEN/BLACK (TYPE B), NOTE #3  IN DRIVERS KICK PANEL, (WHITE, 18-Pin Plug), Pin 4
 POWER UNLOCK  GREEN/WHITE to BLUE/ORANGE (TYPE B),(Requires Double Pulse), NOTE #4  IN DRIVERS KICK PANEL, (WHITE, 18-Pin Plug), Pin 5
 DOOR TRIGGER  PURPLE/YELLOW (-)  @ BODY ECU, (TOP, WHITE, 26-Pin Plug) Pin 12, NOTE #5
 DOMELIGHT SUPERVISION  WHITE (-)  @ DASH FUSE BOX, (WHITE, 20-Pin Plug(A) Pin 8
 TRUNK RELEASE  BLUE/YELLOW (5-WIRE) #775 Relay Required  @ MOTOR IN REAR DOOR
 SLIDING POWER DOOR  N/A  
 HORN  GREEN/RED (-)  @ HORN Switch (BLACK, 12-Pin Plug) Pin 6
 TACH  BLACK/WHITE (AC)  @ DATA Link Connector, (WHITE, 16-Pin Plug) Pin 9
 WAIT TO START LIGHT  N/A  
 BRAKE  GREEN/YELLOW (+)  @ BRAKE SWITCH or DASH FUSE BOX, (WHITE, 16-Pin Plug(F), Pin 16
 FACTORY ALARM DISARM   PINK (-) (Requires Double Pulse) NOTE #6  IN DRIVERS KICK PANEL, (WHITE, 18-Pin Plug), Pin 8
 ANTI-THEFT  TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1  @ IGNITION SWITCH TUMBLER
 EXTRA INFORMATION
 NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module: (For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation. (For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for Operation) 2-KEYS Required to Program Module. To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS MODULE Page on this website. NOTE #2: the BECU (Body Electronic Control Unit) is connected tot he back of the FUSE BOX under the DRIVERS SIDE of the DASH. This Unit has (3) Harness connectors on the RIGHT Side of the FUSE BOX. NOTE #3: this wire is only needed if the Door Locks do not function with the Aftermarket System while the vehicle is running. All other times just use the Factory Alarm Arm wire. NOTE #4: this wire is only needed if the Door Locks do not function with the Aftermarket System while the vehicle is running. All other times just use the Factory Alarm Disarm wire. NOTE #5: the BODY ECU is attached to the Back of the DASH FUSE BOX, it has 3 Plugs on the Right side Edge. NOTE #6: TEST this wire while turning the Key in the Drivers Door. This wire will also Unlock the Doors
一般来讲,女人过了发育期丰胸产品,想要丰胸就会比较困难,不过也不是不行能的粉嫩公主酒酿蛋,这个时候需要借助专业的丰胸产品,而且是健康有效的丰胸产品丰胸食物。添加WeChat获取免费一对一丰胸指导丰胸效果